UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

stuartp · 12th Feb 2012, 1:02 am

Hi,

I also have a sick TR4172 in my case the RF section seems to be completely useless?

However, I got the unit without the main interconnecting lead between the two units and have used a standard one to one connection lead. Could someone confirm that is correct or are the plugs wired up differently i.e. the pins from one plug connected two different pins on the other plug?

Regards,
Stuart Perry
G0LRX

12th Feb 2012, 1:02 am	#2
stuartp Diode Join Date: Feb 2012 Location: London, UK. Posts: 4	Re: Spectrum Analyser TR4172 Hi, I also have a sick TR4172 in my case the RF section seems to be completely useless? However, I got the unit without the main interconnecting lead between the two units and have used a standard one to one connection lead. Could someone confirm that is correct or are the plugs wired up differently i.e. the pins from one plug connected two different pins on the other plug? Regards, Stuart Perry G0LRX