UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

thx1138 · 9th Jun 2019, 1:59 pm

Decided to investigate the resistors . This came up as 56k , though i hazard a guess its supposed to be 47k.
Thats fine i have some decent new ones, but im only raising this as its slightly confusing reading the colours. If you look the body is yellow, rather than a yellow stripe at beginning.
Showing my age, this has me double taking the actual values.
At the time, was this how they marked the resistors rather that what im used to post 1950s era.

Btw no freq op on bfo anode cap when net selected.
Also i put probe lower down near coil under v2a. When dial is at 6.00 mhz im getting approx 6.500 ish. Same on other band. One assumes this is exoected.

9th Jun 2019, 1:59 pm	#29
thx1138 Tetrode Join Date: May 2007 Location: Bratislava, Slovakia Posts: 65	Re: Another 19 set rebuild Decided to investigate the resistors . This came up as 56k , though i hazard a guess its supposed to be 47k. Thats fine i have some decent new ones, but im only raising this as its slightly confusing reading the colours. If you look the body is yellow, rather than a yellow stripe at beginning. Showing my age, this has me double taking the actual values. At the time, was this how they marked the resistors rather that what im used to post 1950s era. Btw no freq op on bfo anode cap when net selected. Also i put probe lower down near coil under v2a. When dial is at 6.00 mhz im getting approx 6.500 ish. Same on other band. One assumes this is exoected. Attached Thumbnails