UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Forum Announcements and Comments (https://www.vintage-radio.net/forum/forumdisplay.php?f=18)
-   -   The Thanks Thread (https://www.vintage-radio.net/forum/showthread.php?t=60832)

cathoderay57 17th Aug 2019 2:52 pm

Re: The Thanks Thread
 
Many thanks to "Sideband" for kindly offering chassis parts etc for Philips 170A restoration. Also grateful to eBay Mick Scholes (maybe not a Forum member but former Mullard employee) for fair dealings on bakelite cabinet. Cheers, Jerry

Phil G4SPZ 18th Aug 2019 10:09 pm

Re: The Thanks Thread
 
On behalf of the Black Country Living Museum's curators, a very grateful thank-you to Jeremy, a.k.a. Pamphonica, for the rare Pam 710 volume control knob, sent at his own expense too :clap:

Phil G4SPZ 18th Aug 2019 10:16 pm

Re: The Thanks Thread
 
Thanks are also due to Chris ("Herald1360") for the Semikron diode packs to repair my heavy duty battery charger, much appreciated :thumbsup:

Chris55000 22nd Aug 2019 2:39 pm

Re: The Thanks Thread
 
Hi!

And more very grateful thanks to Member Dave G4EBT for help with the "Ladybird Transistor Radio" parts, very generously donated to me and on the way!

Chris WIlliams

David Simpson 24th Aug 2019 6:08 pm

Re: The Thanks Thread
 
Many thanks to Norman Raeburn for two EF95's. Regards, David

llama 28th Aug 2019 9:13 am

Re: The Thanks Thread
 
Many thanks to ted_ntsx for the variometer (19-set type) and for hanging onto it for long enough for me to arrange pick up.

Just need to re-instate its Pye connector and get it used!
Graham

martin.m 29th Aug 2019 8:54 pm

Re: The Thanks Thread
 
Many thanks to Andy (Diabolical Artificer) who went out of his way to transfer an Internet video onto DVD and send it to me in the post.

Radio_Dave 29th Aug 2019 9:34 pm

Re: The Thanks Thread
 
A big thank you to Barry (Audio1950) for his help and generosity with parts to get my HMV 201 gramophone back into full working order;).


Best Regards
David

Keithcan 1st Sep 2019 5:26 pm

Re: The Thanks Thread
 
Just found this 'Thanks' thread and although I've only been a member for a short while I have a few people to thank already.

Firstly to Mike (Crackle) for responding to my request for advice on record players and then offering me a nice one for a very reasonable price. Sadly this was lost in transit by Hermes which was a great shame as it was a relatively rare unit.

Next is David Simpson for gifting me a Pye Workshop Rack which now sits proudly on my workbench.

Although David lives a few hundred mile from me the reason I was able to take the rack is thanks solely to Sean Williams for picking it up from David and actually going a out of his way to deliver it direct to my door on his way home. A star in my book.

Then we have Phil G4SPZ who replied to my wanted ad for an Avo. Thanks to him I now have a really nice Model 8 that would be worthy of being in any collection.

Finally thanks to Stephen 'Freya' for gifting me a pair of Pye plugs for the above test rack.

What wonderful people there are on this site. I only hope I can contribute something in return in the future.

Keith.

deliverance 2nd Sep 2019 5:04 pm

Re: The Thanks Thread
 
A grateful thanks to Dave (m0cemdave) for all his help and extra bits . Very pleased with the Atalanta it's a nice one thank you .

mole42uk 6th Sep 2019 12:41 pm

Re: The Thanks Thread
 
Thanks to Mark Hennessy for the Solartron and Philips test instruments. And the tea!

cathoderay57 6th Sep 2019 3:05 pm

Re: The Thanks Thread
 
Thanks once more to Sideband for going above and beyond the call of duty in providing a replacement Philips 170A cabinet together with chassis fixings, knobs and baffle board. This will enable another scrap chassis to be returned to use.
Jerry

ben 9th Sep 2019 9:32 pm

Re: The Thanks Thread
 
Thanks to two generous forum members are due from me.

-To Nickthedentist, for the tapes he picked up, and then sent me at his own expense.

- Also to Audio1950 for the gift of the flexidiscs, which are a great addition to my collection of audio oddities!

Reelman 11th Sep 2019 4:13 pm

Re: The Thanks Thread
 
Many thanks to G4YVM David for the Sony tapes, very grateful. They will please my granddaughter! By the time she starts school will cassettes be common again or out of favour I wonder?
Thanks again,
Peter

Cobaltblue 16th Sep 2019 2:38 pm

Re: The Thanks Thread
 
Like to thank David AKA Captainpugwash for picking up the Ever Ready Sky Emperor from Paul RK, parcelling it up and sending to me down here in Poole.

It was much appreciated its not a small set :thumbsup:

Also like to convey my thanks to Paul RK for gifting it in the first place :thumbsup:

Cheers Guys

Nymrod121 16th Sep 2019 8:20 pm

Re: The Thanks Thread
 
Many thanks to Jan (Wavey Dipole) and Alan (Goldie99) re. yesterday's meet-up at Leicester.
The Tek 'scope is now with its new custodian and Alan's a happy bunny with his Farnell PSU from Mark Hennessy.
Nice to see you, gents! :thumbsup:
Guy

Reelman 18th Sep 2019 8:47 pm

Re: The Thanks Thread
 
A special thank you to Norman Raeburn for generously sending out the caps and diodes at no charge.
That was really good of you, cheers.
Peter

Chris55000 21st Sep 2019 2:08 am

Re: The Thanks Thread
 
Hi!

My grateful thanks to Member "ATS Bod" Jim Knowles for the donation of a Mullard E7600 uncompleted Valve tester for parts, a "Texscan" Sweep Generator for FM Radio alignment and a few other odds and ends!

(Technical note for Jimbo!)

He said the Video Amplifier Module was different to the one shown in the book I got with it but I found the circuit in the book for the VS-50 Model on k04BB matches the topology and layout of the one I've got with just a few component-value changes!

I just need to find out what size screws I need for the module and order a few 220Ω carbon composition resistors from Mouser now!

Chris Williams

jayceebee 22nd Sep 2019 9:01 pm

Re: The Thanks Thread
 
A big thank you to Mike, Dual Standard for the FOC A44-120W CRT.

John.

Viscount 23rd Sep 2019 6:56 pm

Re: The Thanks Thread
 
i would like to say thanks to all on this site for their advise ,it is truly amazing the amount of info out there from so many experts (of which im i am far from one)it doesnt seem to matter if you are an expert or novice the advice is always without prejudice,keep up the good work all and thanks again


All times are GMT +1. The time now is 4:44 pm.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.