Smart Thorn 9000 chassis tv project
I have thanks to the kindness of a forum member a few old Thorn tv's.
I have an original 1975 Ferguson branded Thorn nixie tube display 9000 tv. It has its IF/decoder board missing ,so I am embarking on an ambitious project to include a digital front end . I would also like to incorporate Wifi ,HDMI and SD card reader. The first four channels of the six buttons will access BBC1,2 ITV and Channel 4 etc. Then button 5 will access the digital menu direct ,all with nixie tube indication. Button 6 will access HDMI ,SD and Wifi and will be toggled through modes. I will keep you updated if you are interested,I will be making a custom pcb to fit in the original chassis frame,with direct tube drive and sync etc. Gill |
Re: Smart Thorn 9000 chassis tv project
I look forward to seeing this, it's the perfect conversion for a set like this especially as it's already missing its original decoder.
I always prefer to use the set's own controls, never liked the idea of having a separate box for each TV & VCR along with the clutter of remote controls this entails. It just seems right to have the set directly access the various services, as it was intended to. Brian |
Re: Smart Thorn 9000 chassis tv project
That'll probably end up as the world's best equipped CRT telly! With my own level of experience it sounds like a mammoth task but well worthwhile. Please do let us know how you get on with this, I'm interested to see what is possible although I imagine I'd probably spend as much time gazing at the beautiful Nixie tubes as at the screen!
Regards, Paul |
Re: Smart Thorn 9000 chassis tv project
Gill you really are going to a lot of trouble but this would be some thing to see if you manage to pull it off , best of luck .
|
All times are GMT +1. The time now is 1:18 pm. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.