Braun clock face
1 Attachment(s)
Hi
Had to dismantle this alarm clock because of a leaky battery ( what a mess !). Is there a way to get the clear face off without damage so the hands can go back on ? Thanks Pete |
Re: Braun clock face
Ah, I’ve got one of those! I think the plastic over the dial just pops off if you get a fingernail round the edge of it, the dial itself is just part of the main housing with the numbers printed directly onto it. If you happen to have one of those little sucker things to stick things to Windows they are quite good for pulling these sorts of things off.
Regards, Lloyd |
Re: Braun clock face
1 Attachment(s)
Thanks Lloyd I’ll give it a go
There are 3 access points on the rear,but no obvious lugs to lever back |
Re: Braun clock face
1 Attachment(s)
I’ve just had a look at mine, looks like 3 places where there are very small clips, one at 2, 6, and 10, it does require a bit of force to get it to come off.
Regards Lloyd |
Re: Braun clock face
1 Attachment(s)
Success !
I used the screen puller for iPhone screens Popped off really easily Well thought Lloyd |
Re: Braun clock face
Thanks for your help Lloyd
|
Re: Braun clock face
No worries, glad to see it worked! That looks a useful tool, might have to get one myself!
Regards, Lloyd |
Re: Braun clock face
On EBay for not at lot .If you are into changing screens on phones much better than the single sucker .It has an opening limit so when the screen comes free it doesn’t rip the flexi !
|
All times are GMT +1. The time now is 9:37 am. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.