UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)

- Components and Circuits (https://www.vintage-radio.net/forum/forumdisplay.php?f=40)

- - Anyone recognise this connector? (https://www.vintage-radio.net/forum/showthread.php?t=155564)

Karen O

8th Apr 2019 10:36 am

Anyone recognise this connector?

4 Attachment(s)

I acquired a microprocessor trainer for the Intel 8080 a week or two ago (a picture of one like it is supplied below).

It came with a plug-in card that is clearly a serial interface for a terminal, plus a 2708 monitor EPROM.

The supplied cable has a connector on the end which is presumably for a teletype/teleprinter/terminal but I've never seen one like it before.

Can anyone shed any light on what it might have plugged into?

emeritus

8th Apr 2019 11:42 am

Re: Anyone recognise this connector?

1 Attachment(s)

No idea what it would be connected to, but the connector looks like one from Radiospares: extract from the July-Oct 1980 RS catalogue attached. They will cost a lot more today!

barrymagrec

8th Apr 2019 12:48 pm

Re: Anyone recognise this connector?

RS still do them - the call them automotive connectors now - look under Cinch.

No idea what this one was used for though.

All times are GMT +1. The time now is 12:34 am.