![]() |
Re: The Thanks Thread
Many thanks to Junk Box Nick for the 5B/254 pamphlet that arrived today.
Joe |
Re: The Thanks Thread
..and another thing- Thanks to Lyn Goodman for supplying electrolytics to restore my other half's boombox.
Dave |
Re: The Thanks Thread
Many thanks to Paul (Paul Stenning) for the DC power adapter that arrived today.
David |
Re: The Thanks Thread
Many thanks to Mike, Cobaltblue for the Regentone badge which finishes this old record player beautifully. Norman
|
Re: The Thanks Thread
Thanks to RojDW48 for the valves swift delivery .
|
Re: The Thanks Thread
Another thank you to RojDW48 for the valves. Very well packed!
|
Re: The Thanks Thread
Thanks to RojDW48 for the Hacker booklets. They all have been scanned and uploaded to HiFi engine. The Hacker User Group also has a copy.
I have forwarded the MC600 stuff to Liamo81. |
Re: The Thanks Thread
Many thanks to 'alfatangowhisky' for the Osborne 1A computer. It's absolutely beautful inside, I've never seen such shiny PCBs! Restoring it will be an interestng project that I'll probably start a thread on in the appropriate section.
|
Re: The Thanks Thread
I've collected the games consoles. A big thank you to gridrunner :thumbsup:
|
Re: The Thanks Thread
Many thanks to Glyn (Welsh Anorak) for the Bulgin mains plugs/sockets that safely arrived today, I have never seen them like new condition before.
David |
Re: The Thanks Thread
Thanks tp Martin Dillen_de for the single valve model receiver that he has sent to me
|
Re: The Thanks Thread
Another big thank you to Glyn (Welsh Anorak) for the Crystal set that arrived very well protected (Thanks Glyn)
It will go nicely with my other Ivalek bits 'n' bobs :thumbsup: Cheers Mike T |
Re: The Thanks Thread
Many thanks to Andy,Diabolical Artificer,for the recorder (musical variety) which arrived today, My wife is very pleased with it and brownie points are awarded all round. Best regards,Peter.
|
Re: The Thanks Thread
Thanks again to G6ONEDave for sending a few more of the catalogues he has been redistributing.
Much appreciated. |
Re: The Thanks Thread
Hearty thanks to peter_sol for sending me the parts FOC that enabled me to revive a BSR deck - and an annotated sketch on how to go about it! A true gent.
|
Re: The Thanks Thread
Many thanks to AC/HL for the perdio mains connector, a small but vital part.
Greg. |
Re: The Thanks Thread
Thanks very much to Glyn (Welsh Anorak) who kindly sent me the subcarrier reference coil for the PAL encoder circuit I am building. It's not something that can be readily purchased so really appreciate receiving it.
Regards, Symon |
Re: The Thanks Thread
Like to thank RichardGM for the VFD which arrived safe and well.
A nice thing to play with once the bad weather inevitably returns :thumbsup: Cheers Mike T |
Re: The Thanks Thread
I would like to offer my appreciation to all of the people who have commented on my recent post for a Marconi TF-2701 bridge.
Especially GMB for his very kind help and Tim for his offer. This forum is my go to source of delight. Mostly just to read and enjoy but sometimes to look for guidance. I could rave on but I shan't. You get my thoughts. Thank you! Robert. VK2 Broke No Money. |
Re: The Thanks Thread
Thanks for the manual Robert.
|
Re: The Thanks Thread
And GMB for making it available
|
Re: The Thanks Thread
Thanks to G6ONEDave for the pre-set capacitors which arrived today.
Cheers Mike |
Re: The Thanks Thread
Thanks to Dennis M for the cable just the job cheers.
|
Re: The Thanks Thread
A big thank-you to Barnmead a.k.a Richard for the donation of a selection of radios to the future MEET exhibition. It was a pleasure to meet in person at last, too.
|
Re: The Thanks Thread
Many thanks to David (David G4EBT) for the Push-Button Latching Switch Bank that arrived this morning (amazing quick service), looks like new almost.
David |
Re: The Thanks Thread
Very many thanks to Jeremy (Pamphonica) for sending me the Marconi probe power connectors. https://www.vintage-radio.net/forum/...02#post1492702
Peter. |
Re: The Thanks Thread
Big thanks to RojDW48 for the amstrad/binatone manuals.
|
Re: The Thanks Thread
Many thanks to 'David G4EBT' for the 12SK7 valves etc, packing and delivery both excellent.
John |
Re: The Thanks Thread
Many thanks to Winnem1 for the RB wobbulator pcbs, a nice winter project
Ed |
Re: The Thanks Thread
Many thanks to Tim (llurkio) for sending a selection of precision 1% resistors, much appreciated.
|
Re: The Thanks Thread
Special thanks to Phil (Phil G4SPZ) for sending me a couple of
interesting Avometers FOC. Thanks Phil Ian |
Re: The Thanks Thread
Hello a big Thank You to Martyn ( Icttutor )For the Mullard HSVT 1. it was a plesure to meet you Martyn.
Regards Kevin. |
Re: The Thanks Thread
Thanks to WaveyDipole for the Virgin cable modem/router, and to AdrianH for the DDR2 DIMMs. Much appreciated.
|
Re: The Thanks Thread
Thank you to Sortedradio (martin) for the safe delivery of the Amstrad discs)
They will be put to good use. |
Re: The Thanks Thread
I would like to thank Whiskas Item 29 arrived safe and I must say very well packed
Trev |
Re: The Thanks Thread
Thankyou to whiskas (Rob) for the EM84 valve that safely arrived yesterday.
Looks as new condition and was extremely well packaged. David |
Re: The Thanks Thread
Many thanks to greg_simons for the Dansette tuning capacitor.
Adrian. |
Re: The Thanks Thread
Many thanks to Jeremy (Pamphonica) for the small preset pots, the Iso clamp ammeter is now working nicely
Ed |
Re: The Thanks Thread
Many thanks to Barry (brenellic2000) for the Brenell Specifications, Circuit Diagrams & Service Notes document that I purchased, arrived safely today, a good quality document, a really good reference source.
David |
Re: The Thanks Thread
A special thanks to llama, Graham for the Electroniques Catalogue. Hours of “l wish” reading there! Was free including postage so making a charitable donation.
Thanks again for your generosity. Peter |
Re: The Thanks Thread
Thanks to Uncle Bulgaria: Joshua, for the two plugs. The ex-gov one was used on a number of WW2 sets to provide 12v so will prove to be very useful.
Thanks again, Peter |
Re: The Thanks Thread
Many thanks to westcliff Gus for the AF102 transistors, it's most appreciated.
Greg. |
Re: The Thanks Thread
A big thank you to Jim (G4XWDJim) for the Gould OS 255 Oscilloscope and RS X1 -X10 scope lead that I collected this morning.
It was good to meet Jim, once again thank you for this very generous F.O.C. item. From a quick test, all is working well. Before I use it in earnest, I will check out the 950 volt output winding of the mains transformer as read in older Threads that it can suffer with shorted turns. David |
Re: The Thanks Thread
Thank you to Steve (stevehertz) for the VHF-UHF Book that safely arrived this morning, loads of interesting information to read.
David |
Re: The Thanks Thread
Many thanks to Lightning for the faulty Fluke DMM which arrived today.
Kev |
Re: The Thanks Thread
Thanks to Greg and Mike for ferrying my box of hardware from Valvepower to Golbourne, and then Thanks to Dave Moll for stepping into the breach when My car broke down on the M6 at Killington lake services. Picked up the gear from Dave all safe and sound.
Many thanks to all for your kindness. Andy. |
Re: The Thanks Thread
Thank you to Dave (dave nt) for the 6 phono plugs that safely arrived this morning, they will be put to good use.
David |
Re: The Thanks Thread
Can I echo David above and thank Dave nt for the very useful and vital long reach phono plugs and the sockets.
Also a big thanks to andrewferguson for the big box of goodies that arrived well packed yesterday. Gentlemen you are the epitome of forum membership! I had to look up how to spell epitome though :) Peter |
Re: The Thanks Thread
Thanks to David (Factory) for all his generosity and help resolving a chain of faults.
|
Re: The Thanks Thread
Big thanks to Kev (outrun_uk) for helping me out with a little Panasonic telly. Showing the world's worst video game to a whole new generation of victims!
|
All times are GMT +1. The time now is 6:51 am. |
Powered by vBulletin®
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.