Re: The Thanks Thread
 

Thankyou to Tim (Timvintage) for the Grundig TK 125 tape recorder that arrived several days ago.

David

Re: The Thanks Thread
 

A very big thank you to Ian, (Northyorks1) for his generosity in sending me 2 lovely pocket radios, it’s really appreciated:-)
Thank you
Rob

Re: The Thanks Thread
 

A huge thanks to Forum members David Taylor (G4EBT) and Paula (frsimen) for providing help and support during the restoration of a troublesome Bush DAC90A.

I'm sure David won't mind if I give Paula a special mention for her patience, perseverance and technical knowledge in guiding me through several layers of problems to finally arrive at a successful outcome.

Re: The Thanks Thread
 

Many thanks to Adrian, agardiner for the station markers received. He kindly covered the postage as well! Will fill some empty spaces on a KB set I have.
Cheers!
Peter

Re: The Thanks Thread
 

A big thank you to Chris (Christoffrad) for the FOC Dynatron Cordova TRP1 tape recorder original Operating Instructions, which will come in very handy.

David

Re: The Thanks Thread
 

Massive thanks to AC/HL (Bill) for donating a pair of Mullard Mustard capacitors to help the repair of an aircraft audio alarm unit! They worked a treat!!

Cheers, Scott

Re: The Thanks Thread
 

I would like to say a huge "Thank You" to Graham (SunSPARC) for his kind gift of a Tektronix 465. I have been after one of these oscilloscopes since I can't remember when and, now, I have one - or will have very soon - it's in transit as I write.

I'm looking forward to giving it a good old fettle (what's in a name eh?:-D) and then enjoying seeing it shining away on the bench in use for many years to come.

Lovely!

Steve.

Re: The Thanks Thread
 

Oh, that's good. Scopes greatly aid understanding. Besides, something with a control panel like a 465 impresses the hell out of visitors :-)

David

Re: The Thanks Thread
 

Just wanted to say thanks to Electronpusher0 who sent me a surplus AVO movement which I was able to modify and use to repair my AVO Two Part Tester. The result is that I now have a properly working instrument! Much appreciated!

Re: The Thanks Thread
 

Many thanks to chris55000 for using the black arts of pcb design to replicate my brc power regulator boards in nice heatproof FR4, not only that but loaning me a sweep generator and sundry other test equipment to align an i.f strip, plus selling me the marconi 2018 signal generator, just got to fix it, (should be fun).
Greg.

Re: The Thanks Thread
 

A big thanks to Chris55000 for the Tektronix 545A and 465 oscilloscopes (and to his pal Steve for transporting both Chris and 'scopes). My decades long quest to get a big valved Tek finally answered:)

Re: The Thanks Thread
 

I would also like to thank Chriss55000 for dropping off the 465B scope he sold me while he and his friend Steve were on their way up to Jez1234 to drop off those scopes. Very much appreciated- thanks so much fellas. My restoration project will be posted on here soon.

May Chris' floorboards no longer creak under the weight of the scopes he still has! :-D

Re: The Thanks Thread
 

Thanks to Craig Sawyers for sharing some Shellac flakes!

Cheers, Scott

Re: The Thanks Thread
 

Also thanks to Electronpusher0 for offering FOC an audio frequency analyser, sadly on this occasion I couldn't take him up on the offer, but it was very much appreciated.

Re: The Thanks Thread
 

A belated thank you SunSPARC for the Ferguson video recorder review. Arrived in excellent condition and FOC.

Cheers,
John.

Re: The Thanks Thread
 

Many thanks to AnalogueMan Alan, for the Simpson 260 meter manual, very good of him to take the time & trouble to pack & post it off to me F.O.C. much appreciated.

Re: The Thanks Thread
 

Many thanks to Paul_RK for the battery socket and to David G4EBT for the printings of the battery scan's.

Your efforts are much appreciated, Gents! :clap:

Re: The Thanks Thread
 

Thanks to julesomega for the speakers. I'll send you a video of them when the project is finished. ( Don't hold your breath :D )

Re: The Thanks Thread
 

Thanks to Rob (cambridgeworks) for the fuses which arrived this morning just the job.

Re: The Thanks Thread
 

Thanks to - Glyn, Welsh Anorak - for carefully selecting, desoldering and sending up a replacement opto-out socket for my Sharp TV, now restored to full working order.