Re: The Thanks Thread
 

Many thanks to AC/HL for the DY86, one more fault eliminated on this little tv.
Greg.

Re: The Thanks Thread
 

My very grateful thanks to Member WaveyDipole who very generously donated me three Tektronix 468 PCB assemblies to help me repair the '468 I imported from America that turned out to have a fatal self–test failure, caused by an internal short–circuit within the original TRW1007PC Video DAC dragging the +5 V to about 4.1 V, resulting in failure!

I have fitted the replacement Graphics panel and the supply line is now OK – there are still other analogue faults to look at, but I've got a carcass with a spare A15 Interface Board for these!

You are a Star, Sir!

Chris Williams

Re: The Thanks Thread
 

Thanks to Rob "whiskas" for a very well-protected package of useful vintage parts- there are some commercial operators who could take worthwhile lessons from him on how to package and protect posted items properly!

Colin

Re: The Thanks Thread
 

Just a belated thanks to Cifer1887 for supplying me with the Fakerscope 3000 user guide.

Brilliant!

Dave

Re: The Thanks Thread
 

Thanks to ChrisKT for the DRAM. It's enabled me to successfully repair memory faults on a couple of my beebs!
Thanks

Re: The Thanks Thread
 

Just to say a big thanks to Terry (valvepower) for sending me the switches at no cost to me , Mick.

Re: The Thanks Thread
 

A big thank you to Member Jac from the Netherlands who scanned me the Philips PM3055 Oscilloscope PCB layout drawings with the pink and grey tracking tints – none of the available online or paper ones I can find show these and the scans were absolutely pristine and pin–sharp!

Chris Williams

Re: The Thanks Thread
 

A big thank you to Glyn for the Z80 processors, Just need to darg my Nascoms out of storage :thumbsup:

So many projects so little time :(

Cheers

Mike T

Re: The Thanks Thread
 

Thank you to Half a Mullard (Howard) for sending me a Micro Cassette in response to my wanted advert.
Much appreciated
Rob

Re: The Thanks Thread
 

A big thanks to David aka captainpugwash for sending me a load of eight track tapes at no cost. Mick.

Re: The Thanks Thread
 

My thanks to Wendymott for kindly sending up the Z80 PCB, very well packed and protected too, it made it here in perfect condtion.

Re: The Thanks Thread
 

Big thanks to G6Tanuki for the Pye Control head.
Very well packaged,
Excellent!

Re: The Thanks Thread
 

Many thanks to Nickthedentist for the lovely Monacor grilles and electronic “transformers”. The grilles will make a big improvement to my inside wall loudspeakers. Great packaging as well. Thank-you Nick!

Peter

Re: The Thanks Thread
 

Many Thanks to Gordon (DRYJOINT) for the Roberts R707, fast , safe , arrival.

David

Re: The Thanks Thread
 

Thank you Craig Sawyers for offering and carefully packing an aluminium side panel for my ‘Startronic’ DC Power Supply.

I acquired this useful PSU many years ago, minus said panel. Now, finally it’s complete.


SimonT.

Re: The Thanks Thread
 

Thank you to Scott (ScottBouch) for the 250mA 20mm glass fuses that safely arrived today.

David

Re: The Thanks Thread
 

Thank you to Dave (Dazzlevision) for the 3500 convergence panel!

It works a treat!

Cheers.

Jan

Re: The Thanks Thread
 

Thank you to Graham (SunSPARK) For the AYR Teletext decoders.

They work Great!

Cheers.

Jan

Re: The Thanks Thread
 

Thanks to Andy (Yestertech/Setsappeal) for the big box of pots, which arrived safely last week.

Re: The Thanks Thread
 

I would like to thank Aaron (Aaron_555) very much indeed for his kind gift of a Philips CD104. I will coax it back to life - it's going to be fantastic to have a 104 to play CD's on again after all these years. We will treasure it.

Best wishes,

Steve.