Roller coaster identification
1 Attachment(s)
Can anyone shed any light on this roller coaster ?
What it came out of and ratings etc. Regards Tim |
Re: Roller coaster identification
Not just a roller coaster, that looks like a transfer roller coaster where wire is wound from a plain metal storage roller onto the insulated coil former roller. They are much less common. The only one I've had was in a Marconi PA stage and that had equal size rollers, both about 5 inch diameter.
Nice! David |
Re: Roller coaster identification
It's out of a Racal 931 manpack transceiver: https://www.recelectronics.co.uk/syncal30.htm
|
Re: Roller coaster identification
Thanks - I vaguely remembered it was from a Racal and due to the antenna connection guessed it was some sort of portable unit.
I'm planning on building a vintage AM tx for 160, 80 and 60mtrs and was considering using it as the PA pi tank coil - but I'm not convinced it could handle the power so will likely use a switched tank coil instead - plus it'd be a bit easier to tune. Regards Tim |
Re: Roller coaster identification
Looks like the ATU from a Racal manpack to me!
|
All times are GMT +1. The time now is 4:50 am. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.