UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Forum Announcements and Comments (https://www.vintage-radio.net/forum/forumdisplay.php?f=18)
-   -   The Thanks Thread (https://www.vintage-radio.net/forum/showthread.php?t=60832)

Cobaltblue 17th May 2024 7:52 pm

Re: The Thanks Thread
 
Many Thanks to Mark (mark_in_manc) for the Blackstar Function Generator, very pleased with it :)

Cheers

Mike T

DMcMahon 20th May 2024 11:48 am

Re: The Thanks Thread
 
Many thanks to Adrian (agardiner) for the 5 Bluetooth modules that safely arrived this morning.

David

Bear2Biker 22nd May 2024 10:57 am

Re: The Thanks Thread
 
Thanks to Cambridge Works (Rob) for the well packed CV575)

John M0GLN 30th May 2024 3:52 pm

Re: The Thanks Thread
 
Thanks to Wendymott for the Plessey IC's, very well packed with quick delivery.
John

turretslug 4th Jun 2024 1:54 pm

Re: The Thanks Thread
 
Thanks to Rob CambridgeWorks for a consignment of gleaming professional spec. voltage stabilisers/references that turned up very promptly and very well packed,

Colin

Radio Wrangler 4th Jun 2024 8:24 pm

Re: The Thanks Thread
 
Thanks to Jon (eaglework) for the HP8443A Tracking Generator.

This is the low noise 110MHz one with counter for the analysers which fit the 140 scope frames. It's going to make the Kingdom ARS' analyser a lot easier to drive and able to do swept frequency measurements of gain/loss and VSWR.

Great packing, too.

David

ScottBouch 5th Jun 2024 1:38 pm

Re: The Thanks Thread
 
Many thanks to Ron (emeritus) for sending over a 1990 copy of the STC yellow book! Well packed, and in good condition.

It's much appreciated, many thanks,
Scott.

terrybull 9th Jun 2024 10:45 pm

Re: The Thanks Thread
 
Sincere thanks to agardiner aka Adrian for giving away a really nice Bush DAC cabinet and to Reelman aka Peter for bringing it towards me so I could pick it up today. Apologies our meeting was brief but we both had things to do. It’s been a big help.

John10b 12th Jun 2024 5:49 pm

Re: The Thanks Thread
 
Thank you to Bill AC/HL for giving me OC81 foc, many thanks Bill.
John10b

SiriusHardware 13th Jun 2024 8:26 pm

Re: The Thanks Thread
 
My sincere thanks to local forum member Steve_Bell for offering a nice, working Hacker Mayflower II for a really generous price. Nice to meet you, Steve.

DMcMahon 13th Jun 2024 10:26 pm

Re: The Thanks Thread
 
Thankyou to David (David G4EBT) for the Rawplug soldering iron that safely arrived this morning, it was well packed. Looking forward to trying it out in a couple of days.

David

factory 15th Jun 2024 7:41 pm

Re: The Thanks Thread
 
Thank you to George (buggies) for the Solartron test lead for my LM1440 and the NOS Weston cell.

David

DMcMahon 20th Jun 2024 8:31 am

Re: The Thanks Thread
 
Many thanks to Avinunca for the Teac bulk tape eraser that safely arrived yesterday.

David

jackrae 21st Jun 2024 1:45 pm

Re: The Thanks Thread
 
Many thanks to Andy (the Diabolical Artificer) for his Cambridge Bridge

greg_simons 25th Jun 2024 9:01 am

Re: The Thanks Thread
 
Many thanks to marconi_mpt4 for digging up the manual on an old labgear pattern generator, very big help.
Greg.

ScottBouch 25th Jun 2024 11:17 am

Re: The Thanks Thread
 
Big thank to G6ONEDave for posting me some vintage Mullard diodes to repair the EE Lightning warning panel display unit. Brilliant to be able to carry out a correct repair using the exact original components, maintaining originality.

Many thanks for the support, it's appreciated,

DMcMahon 25th Jun 2024 12:48 pm

Re: The Thanks Thread
 
Thankyou to Scott (ScottBouch) for the Teac microphone that safely arrived yesterday.

David

John10b 25th Jun 2024 10:40 pm

Re: The Thanks Thread
 
Thank you to Dave, G8vsjdave, for the free radio chassis.
John

ScottBouch 25th Jun 2024 11:00 pm

Re: The Thanks Thread
 
A big thank-you to James (gw0udmgw), for the donated 3D printer. It was a pleasure to meet, and the machine has been fun to start getting to know!

Thank you, Scott

AnalogueMan 3rd Jul 2024 10:11 am

Re: The Thanks Thread
 
Many thanks to VT_FUSE and the many other contributors who kindly helped get my DS801 desoldering station back in working order by contributing not just advice but spare parts, free of charge, and wouldn't even let me cover the postage!


All times are GMT +1. The time now is 1:40 pm.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2024, Paul Stenning.