UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Forum Announcements and Comments (https://www.vintage-radio.net/forum/forumdisplay.php?f=18)
-   -   The Thanks Thread (https://www.vintage-radio.net/forum/showthread.php?t=60832)

terrybull 18th Feb 2015 6:42 pm

Re: The Thanks Thread
 
My thanks to member KC0G John in the US who spent some time in sending me some info I was struggling to find.

Radio Tech 19th Feb 2015 11:03 am

Communication Measurement CM7400
 
Hi folks

I would like to say thank you to Steve (fettler) for supplying me with a frequency counter that initially would not count and needed the fault put right. And thanks to everyone who has given a little help with suggestions on the fault, I have now successfully repaired the counter by replacing one of the IC's namely a MC10116P which is better known as a Triple Line Receiver I obtained a couple of these from Little Diode who specialise in obsolete types of components such as these.

Best wishes

Ken:thumbsup:

ColinTheAmpMan1 23rd Feb 2015 3:19 pm

Re: The Thanks Thread
 
Many thanks to "Oldtestgear" (Phil) for two great Tektronix 'scopes and a Racal-Dana 1998 counter. Really good prices for some great test-gear :thumbsup:.
Colin.

Ti Pwun 25th Feb 2015 11:13 am

Re: The Thanks Thread
 
Big thanks to Tim (tim.norris) for packing the AVO 8 mK 5 very well and getting it to me - It is indeed in lovely condition and arrived this morning. Very much appreciated.

Chris55000 6th Mar 2015 10:05 pm

Re: The Thanks Thread
 
My grateful thanks to the following:-

1) Member Gommster (Dave) for the Books, Farnell PSU and Heathkit Distortion Meter I selected from his Charity Clear-out;

2) JohnBHanson for the BT301 Cable Tester - I really enjoyed my trip to Worthing for it!

3) Bryan M for offering me the Learnakit Scope - I propose to fully document this on here, the idea being anyone who has one of the earlier valve models can make a comparison and try reconstructing a transistor model of their own - I believe the same cabinet/chassis was used in both the valved and transistor models!

4) Member Omegaman for the G4PMK Spectrum Analyser Information!

Thank you all very much Gentlemen!

Chris Willliams

Ti Pwun 21st Mar 2015 8:49 am

Re: The Thanks Thread
 
Many thanks to Jim (G4XWDJim) for the short wave books.

Ti Pwun 31st Mar 2015 12:53 pm

Re: The Thanks Thread
 
Big thanks to Ian (trsomian) for the UL84 valve - much appreciated.

ColinTheAmpMan1 31st Mar 2015 5:01 pm

Re: The Thanks Thread
 
Many thanks to "Oldtestgear" (Phil) for providing a foot for the Racal-Dana 1998 that he had sold me earlier and especially for not accepting any re-imbursement for either the foot or the postage.

Audiolab 1st Apr 2015 7:37 pm

Thanks to Ti Pwun ( Jon ) for the superb work he did repairing my Hacker Super Sovereign, he did an amazing job and I have no hesitation in recommending his work as he's a first rate guy.

Superb in every single way and honestly went far deeper into it then I thought he would , truly amazing.

samuria 2nd Apr 2015 12:07 pm

Re: The Thanks Thread
 
many thanks go to jim (G4XWDJIM) for the great box of books.
with so many to learn from, and very sort after titles.
all the best jim :thumbsup:

Scottart 5th Apr 2015 8:50 am

Re: The Thanks Thread
 
Many thanks to Jon ( Ti Pwun ) for the button cap ! Much appreciated !

julie_m 6th Apr 2015 7:31 am

Re: The Thanks Thread
 
Many thanks to the moderation team for letting certain threads go on for as long as they have. No real harm was done, even after the topic had fallen below the horizon; the posts still bore some relationship to one another, even if not the very first post; the tone was still civil; and ..... well, sometimes it's just nice to enjoy the walk and the talk, even if you've already seen what you originally set out to see.

vinylspinner 7th Apr 2015 6:08 am

Re: The Thanks Thread
 
A belated thank you to Mike Barker for taking the time out to test my valves and have a chat, nice to have met you Mike.

Thanks

Nigel

G6Tanuki 13th Apr 2015 8:57 am

Re: The Thanks Thread
 
Many thanks to Jonster for supplying me with a replacement pair of bass/treble knobs and AFC-button for my Roberts R606, along with a couple of the little red frequency-marker slider tabs: my 606 now looks respectable rather than tatty.

Photos will follow!

~~G6Tanuki.

Phil G4SPZ 16th Apr 2015 12:09 pm

Re: The Thanks Thread
 
I'd like to thank Michael ("mickash") for the loudspeaker, and for packing it so well too :clap:

Oldcodger 22nd Apr 2015 10:47 pm

Re: The Thanks Thread
 
To KeithsTV for the circuit of the Music maker.

woodchips 23rd Apr 2015 7:51 pm

Re: The Thanks Thread
 
My thanks to MOTGX Terry for the door to door delivery of a scope.

Many thanks.

Bob

sexton_mallard 23rd Apr 2015 8:53 pm

Re: The Thanks Thread
 
Many thanks to Outrun_uk for the superb Hitachi 'scope. Works a treat :)

G4XWDJim 23rd Apr 2015 11:21 pm

Re: The Thanks Thread
 
Many thanks to Paul, Kalee99 for selling me the Ferguson, Keith, hartleys1 for transporting it to Golborne and finally to Greg, audiomagpie for bringing it the rest of the way to the Midlands.

Jim

Boater Sam 24th Apr 2015 8:54 am

Re: The Thanks Thread
 
A thank you to KeithsTV for the 'scope he brought to Golborne for me, and for carrying it in from his car! Oh, and the capacitors at knock down price too.


All times are GMT +1. The time now is 8:25 am.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.