UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Sets, Parts and Service Information Offered (private sellers only, exact price required, no swaps) (https://www.vintage-radio.net/forum/forumdisplay.php?f=27)
-   -   Baird P2214 405 line TV (https://www.vintage-radio.net/forum/showthread.php?t=175662)

PsychMan 24th Jan 2021 3:04 pm

Baird P2214 405 line TV
 
£30 - Strictly collection only from Fleet in Hampshire. I can offer a contact free collection if we do a bank transfer, or cash in the letter box

Itís the example referred to here https://www.vintage-radio.net/forum/...d.php?t=145656

I have replaced 2 missing valves in the tuner section, and I did start to work on it, but I simply have no time and could use the space.

I cut out the hunts capacitors (and 1 shorted electrolytic), and tacked in some replacements so I could power it up and start work. They werenít intended to be permanent solutions, and I donít usually replace all capacitors, but all were either split or blown apart! :-D

It powers up, you get a line whistle, but then there is some EHT arcing somewhere. My next step was going to be remove the chassis and crt, and firstly give it all a good clean.

Anyway, Iím sure it will be a nice project for someone! I have no means of testing the CRT, but from what I remember the heater continuity looked good.

Adam

AmateurRepairer 25th Jan 2021 12:43 am

Re: Baird P2214 405 line TV
 
Shame your so far away. I would have had that. Not chance of courier at all?

stevehertz 25th Jan 2021 8:30 am

Re: Baird P2214 405 line TV
 
I wouldn't recommend shipping a vintage TV by courier unless the seller is able to construct a stable wooden shroud to protect the end of the tube. I have first hand experience of them arriving with blown tubes.

em536716 25th Jan 2021 11:01 am

Re: Baird P2214 405 line TV
 
Hi there,

Iíll happily pick this up

PsychMan 25th Jan 2021 1:33 pm

Re: Baird P2214 405 line TV
 
PM sent to Ed, provisionally sold.

Mods please close


All times are GMT. The time now is 5:23 pm.

Powered by vBulletin®
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.