Half a Super-het
3 Attachment(s)
after a couple of days tinkering I`v finished half of my Super-het radio, enough to start experimenting with the front end mixer stuff for it, there`s stil quite a few questions I have left regarding it, but Thanks to some of my questions being answered by You guys I`v worked out and designed the I.F bits, demodulator and the AF stage, and stuck what I`v learned on a board.
a perfectly working circuit as well I might add! :thumbsup: the board itself is something Setsappeal may recognise, as it`s part of the packing peices that came with a Matress that he used to cover the dial glass on my Ekco with, and the wooden rails are sawn off peices of Firework rockets I found in the garden. I`m using a little EL84 for the AF driver and it seems plenty loud enough that even I can hear it ;) that is being fed with demodulator EBC90, which in turn is fed with an EF91, the cans are of course out of an old broken Cossor set that I salvaged. it doesn`t have a volume control of AGC yet as I wanted it rigged as Fully working so I could test at each build stage without any dangly bits getting the way. here`s a few pics: |
Re: Half a Super-het
Coming along very nicely. I have been following your progress and reading the posts and learning quite a lot. Well done.
Paul. |
All times are GMT +1. The time now is 2:43 am. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.