UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Cabinet and Chassis Restoration and Refinishing (https://www.vintage-radio.net/forum/forumdisplay.php?f=21)
-   -   PVC/silicone plastic grip fluted tubing (https://www.vintage-radio.net/forum/showthread.php?t=182246)

els1967 25th Jul 2021 8:09 pm

PVC/silicone plastic grip fluted tubing
 
1 Attachment(s)
Sorry if this isn't appropriate so delete if required.

I'm hoping someone can help. I'm after this kind of fluted/ribbed plastic/pvc/silicone tubing as per the pic. I've searched high and low but can't find any anywhere except in a biggish size, ie around 10-15mm diameter. In any case the seller had something like 100m minimum order. I really need some about 5 or 6 mm. Has anyone ever come across it?

Thanks

majoconz 25th Jul 2021 10:41 pm

Re: PVC/silicone plastic grip fluted tubing
 
Does it have to be waterproof? I've put wires into shoe laces before now and they look pretty good. Just cut the ferrule off the end then carefully melt the end of the tube or just a quick dip into Evostik. Join all the wires together in a bit of heatshrink then they will slide easily through the shoe lace.


All times are GMT. The time now is 10:40 pm.

Powered by vBulletin®
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.