56C ringer.
Hi.
I have a 56C ringer, of the two screws that connect the power, one has vanished. On the assumption that it does not magically reappear, does anyone know the thread? It seems to be an imperial thread somewhere roughly equivalent to M4. |
Re: 56C ringer.
It might be a 3BA which is 4.1mm o/d or a 4BA which is 3.6mm o/d. If it's 3.6mm o/d you should be able to tap out to M4 or if it's 4.1mm o/d you might be able to tap out to M5 if it comes to it.
|
Re: 56C ringer.
More likely to be 3BA, as the GPO tended to use odd-numbered BA threads.
|
Re: 56C ringer.
Thanks - I've ordered £3.00 worth of 3BA from ebay - I'll confirm on here if they fit!
|
All times are GMT +1. The time now is 8:16 am. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.