UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (
-   Sets, Parts and Service Information Offered (private sellers only, exact price required, no swaps) (
-   -   Lathe, mill, drill and grinder (

woodchips 28th May 2020 1:58 pm

Lathe, mill, drill and grinder
Not really electronic, please delete if too far away from what should be listed here.

I have an Adcock & Shipley Universal Machine Tool that I can no longer keep. For more detailed info look on

it is the smaller of the two machines.

Firstly, it weighs the best part of 2.1/2 tonnes. Secondly the smallest bit when dismantled weighs about 1 tonne. With all the extra bits total weight must be 3.1/2 tonnes.

As can be seen it is a combined (rubbish) lathe with a really nice H&V mill, pillar drill and universal grinder. This machine is actually parts of two machines, so just about complete. Grinder comes with a Diaform grinder attachment plus various other odds and ends bought new from

It is located at Sutton on Sea, retirement, plans never happened.

I have the mill from the other machine on a steel cabinet in my garage. The grinder could also be split out from the main machine.

It will take many months of restoration to get it all back in working order but the second machine I bought with lathe and mill was fully operational.

Looking for 1200 for everything.

All times are GMT +1. The time now is 5:31 am.

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.