![]() |
Re: The Thanks Thread
Many thanks to Frank for the lovely selection of capacitors received today.
Mike |
Re: The Thanks Thread
Many thanks to Alan SP15 for the BSR tape recorder bits, already using one of the knobs!
Cheers! Peter |
Re: The Thanks Thread
Many thanks to frankmcvey for the four contact file holders that safely arrived yesterday.
As I do not really need all of them I will PM DigitalNoMore (Jerry) to see if he would like two of them (at no charge), as he was the second responder. David |
Re: The Thanks Thread
My thanks to terrybull for the Denon cassette deck.
|
Re: The Thanks Thread
My thanks to LunarTerry for the Roberts Junior and bag.
A most generous gift. All the best, Paul. |
Re: The Thanks Thread
Hi!
My thanks to Paul (wd40addict) for the Solartron A100 Original Colour Printed Manual he generously sent – my eyes have got to the state where "Mauritron Specials" are too tiring on what's left of my eyesight (surgery still awaiting!) to read clearly! Chris Williams |
Re: The Thanks Thread
A big thanks to frankmcvey for the splitter boxes just the job .
|
Re: The Thanks Thread
Really need to thank unitelex (Chris) based in Altrincham who has just fully restored, added Bluetooth and completed bodywork on my late father’s old Ferguson 3400. The whole family are amazed how it looks and sounds and I’m extremely happy with how it turned out and the care and consideration Chris has taken. All the way through he kept me up to date on how things were going and gave appropriate suggestions. Really emotional seeing and hearing it working again just like I remember. Would definitely recommend him for any restorations or repairs as he has clearly spent hours and gone above and beyond to get it working brilliantly and looking fantastic.
Thanks again Chris, Matt |
Re: The Thanks Thread
Many thanks to Downwind27 (Tony) for the 4mm panel mount sockets that arrived yesterday, they will come in useful.
David |
Re: The Thanks Thread
A belated thanks to David DMcMahon for kindly sending me the slider cap knob for the TK141.
|
Re: The Thanks Thread
Thank you Chris, you thanked me in Post # 1547.
David |
Re: The Thanks Thread
Many thanks to gridrunner (Stu) for lots more Unilab modules, much appreciated. I have accepted them on behalf of our local radio club. These days many come into the hobby with very little practical experience, these modules are ideal to remedy that.
Good to meet you in person as well. Cheers! Peter |
Re: The Thanks Thread
Many thanks to Freya for firing up my hedgehog, big help at the moment.
Greg. |
Re: The Thanks Thread
A big thanks to Frank for the Mullard pocket valve data book for free it's appreciated thanks again Frank Regards Chris.
|
Re: The Thanks Thread
Thanks to Electronpusher0 (Peter) for all the work involved with sourcing & despatching the later crop of MINIMOD pcb's.
Much appreciated. David. |
Re: The Thanks Thread
Thanks to: Andy for the xbox360, and Frank for the high quality military spec resistors. Most excellent!
Dave |
Re: The Thanks Thread
Thank you to frankmcvey for the Maplin Precision Gold DMM that safely arrived yesterday.
David |
Re: The Thanks Thread
Just a thank you to Steve (stevehertz) for the Amstrad receiver. Listening to it now.
Kind regards, David |
Re: The Thanks Thread
A big thankyou to ValvoStef for the box of tubes.
I will be passing most of these on also FOC when I get time but one of the interesting things were the LAMBA boxes which I had not seen before. Sent Allan a couple of samples to see what he makes of them :thumbsup: It was a pleasure to meet you Stef Cheers Mike T |
Re: The Thanks Thread
A big thanks to Frank McVey for the Boombox which arrived this morning thanks again Frank cheers Chris.
|
Re: The Thanks Thread
Thank you to Martin (martiR2R) for the quadraphonic Toshiba receiver.
|
Re: The Thanks Thread
Thanks to Barnjet for the gift of the Armstrong Jubilee Mk 2, and to Boulevardier for the loan of an FM sig gen to fix it! Cheers, Jerry
|
Re: The Thanks Thread
Many thanks to Dave (Horris) for the replacement transformer for my Lady Anne radio.
Cheers Dave. :beer: |
Re: The Thanks Thread
Many thanks to Ken (Kentode) for carefully packed manual that arrived today.
Regards, David. |
Re: The Thanks Thread
Many thanks to Tony (Restoration 73) for a NOS Radiospares thermistor, complete with the original packaging! :thumbsup:
|
Re: The Thanks Thread
A big thank you to Martin (martinhog) for the 2 x Teleton F2000 AM/FM Receivers plus extra LES bulbs that arrived safely yesterday, very well packed.
Looking forward to trying them out and trying to fix the low volume issue on one of them. David |
Re: The Thanks Thread
Thanks to Glyn (Welsh Anorak) for the tubing to mend the decks on my 555 .
|
Re: The Thanks Thread
Many thanks to Frank (frankmcvey) for the Clare V154 PAT tester that safely (very well packed) arrived yesterday, looking forward to trying that out and learning more about Portable Appliance Testing.
David |
Re: The Thanks Thread
Many thanks to Chris (Herald 13/60) for the Shure M95 cartridge body - now I can use the stylus I've had hanging around for ages!
|
Re: The Thanks Thread
Grateful thanks to Peter, Kalee20, for supplies of transformer laminations, and information on home bobbin construction. One more project can progress.
Greg |
Re: The Thanks Thread
Many thanks to ADrianH for the Rainbow radio and matsui tv. radiograham.
|
Re: The Thanks Thread
Thank you to Ambientnoise (Ken) for the Sony VHS VCR and for arranging collection with non forum member at RWB to pass onto me. I have received it today.
|
Re: The Thanks Thread
A special thanks to mark-in-manc and Chris, Herald1360.
To get NOS 8.25” tapes is a rare treat! To finally have a Pixytone of my own is great! Many thanks Mark and Chris for your generosity, much appreciated! Peter |
Re: The Thanks Thread
Many thanks to Diabolical Artificer for the resistors. Much appreciated.
Steve. |
Thanks to Keith (KeithsTV)
A big thanks to Keith for making the Sony Profeel available to pick up. It looks the business, worthy of being on the set of the Max Headroom show!
Stu |
Re: The Thanks Thread
Thanks to Ken (Kentode) for the magazines and books recently offered. Happy reading ahead!
|
Re: The Thanks Thread
Many thanks to Jerry (Jez_ 145) for the digital oscilloscope that I picked up from him this afternoon.
It's nice to have met you and l hope that I'll see you again soon as SWMBO has decided we'd enjoy a weekend in Southport in the spring! Cheers Jerry! :beer: |
Re: The Thanks Thread
Thanks to Vynalspinner The transistors have just arrived
all 100 of them Again its very good of you Trev |
Re: The Thanks Thread
Hello
A big Thank You to Kentode for the Scope and making me wellcom . Regards Kevin. |
Re: The Thanks Thread
A double thank you to Vinylspinner for the transistors and the Meters.
I will now have enough analogue meters to deal with multiple students (Grandchildren) I think its better to learn with analogue meters the constant numbers changing on a digital can be a distraction. Those Jelly beans are absolutely ideal for small projects :thumbsup: Thanks Nigel Cheers Mike T |
Re: The Thanks Thread
Many thanks to stevehertz for the 1930s radio service data, really pleased with it all, thank you!
|
Re: The Thanks Thread
Many thanks to Nigel (Vinylspinner) for the transistors.
Much appreciated! Peter |
Re: The Thanks Thread
Many thanks Richard mole42uk for your generosity! That Unitest Polaris will be of good use as we are just renovating an old house!
Thank you very much! Joe |
Re: The Thanks Thread
Thanks to Alastair D for his masterly document on the Hunts CRB3. Most useful Les.
|
Re: The Thanks Thread
Grateful thanks to Welsh Anorak for making some TV droppers available.
Most helpful, Cheers Glyn. SimonT. |
Re: The Thanks Thread
Grateful thanks to Glyn (Welsh Anorak) as well from me for the box of goodies he sent. With 30 seconds of opening the box I was using the Grundig microphone sent with a tape recorder that was just beside me.
Peter |
Re: The Thanks Thread
A very special thanks to Uncle Bulgaria and Stockden for helping me so much with the transportation of a Akai reel to reel tape deck and tapes from Bristol to my door in Garstang Lancashire.
Great to meet Uncle Bulgaria who helped with a large part of the trip. Hugh - what a superstar! I only hope I can repay your help at some stage in the future. Finally Ajs37 for giving me time to arrange collection of this machine. It’s gone to a good home . This forum really proves itself as a fantastic place for meeting kind helpful enthusiasts. Thanks you |
Re: The Thanks Thread
A big thank you to Andrew (Mach One) for the FOC Philips EL 3541 R2R which I collected today, looks in pretty good condition, looking forward to checking it out a little later on.
David |
Re: The Thanks Thread
Thanks to Dave ("nutteronthebus") for the spare quad 33 switch board.
Much appreciated Mike |
Re: The Thanks Thread
Many thanks to terry123 for the tiny tape spool, perfect for my little “Standard” recorder.
Cheers mate! Peter |
All times are GMT +1. The time now is 4:01 am. |
Powered by vBulletin®
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.