UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Sets, Parts and Service Information Wanted (private buyers only, no swaps) (https://www.vintage-radio.net/forum/forumdisplay.php?f=28)
-   -   Looking for an eccentricity gauge to fit brand new heads on betamax video sl-c7 (https://www.vintage-radio.net/forum/showthread.php?t=156278)

panaman86 4th May 2019 1:54 am

Looking for an eccentricity gauge to fit brand new heads on betamax video sl-c7
 
Hi looking for a eccenticity gauge to fit new heads to a sony c7 betamax would be great to get one if anyone got one

greg_simons 4th May 2019 11:47 am

Re: Looking for an eccentricity gauge to fit brand new heads on betamax video sl-c7
 
Don't have one I can give away but I can loan you my own Sony gauge to get the job done if you wish.
Best regards.
Greg.

See_Mos 6th May 2019 11:22 am

Re: Looking for an eccentricity gauge to fit brand new heads on betamax video sl-c7
 
I need to find it first, I have one that I could sell. How does 15 inc post sound?

I'll come back with a picture.

See_Mos 6th May 2019 11:46 am

Re: Looking for an eccentricity gauge to fit brand new heads on betamax video sl-c7
 
1 Attachment(s)
I used to do warranty work for Sanyo, and Sony before they set up their own service centres

I think I bought this from Sony.

greg_simons 6th May 2019 2:04 pm

Re: Looking for an eccentricity gauge to fit brand new heads on betamax video sl-c7
 
Snap!.

Welsh Anorak 6th May 2019 2:43 pm

Re: Looking for an eccentricity gauge to fit brand new heads on betamax video sl-c7
 
Double snap!

elanman99 6th May 2019 3:09 pm

Re: Looking for an eccentricity gauge to fit brand new heads on betamax video sl-c7
 
Triple snap!
(I only have the DTI though, not the bracketry)

Ian

panaman86 11th May 2019 2:28 pm

Re: Looking for an eccentricity gauge to fit brand new heads on betamax video sl-c7
 
Hi yes thats whats i am looking for yes i will take the gauge for 15

saxmaniac 12th May 2019 3:56 pm

Re: Looking for an eccentricity gauge to fit brand new heads on betamax video sl-c7
 
If that one's no good I've got one as well!

Snarf81 6th Jul 2019 9:14 pm

Re: Looking for an eccentricity gauge to fit brand new heads on betamax video sl-c7
 
Hi, I hope it's ok to post on this thread, but I need to buy/loan/hire an eccentricity gauge to fit new heads on my 2 C7's and C6mk11 too. (Too many twos).

If anyone has one, could you please get in touch?

Best wishes
Richard.


All times are GMT +1. The time now is 7:20 am.

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.