UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Hints, Tips and Solutions (Do NOT post requests for help here) (https://www.vintage-radio.net/forum/forumdisplay.php?f=22)
-   -   Reconstructing Gram switch shaft, Philips 431A (https://www.vintage-radio.net/forum/showthread.php?t=190980)

murphy512 7th May 2022 4:32 pm

Reconstructing Gram switch shaft, Philips 431A
 
5 Attachment(s)
Hello,
I don't expect many of you having this problem, but I have a Philips 431A with a
broken/missing Gram switch shaft and the likelihood of getting one is almost impossible.
I had a go at reconstructing it by using a copper 8mm equal tee and a metal straw. So far has been working fine.
Aldo

vinrads 7th May 2022 5:24 pm

Re: Reconstructing Gram switch shaft, Philips 431A
 
1 Attachment(s)
Well done in getting it to work ,if it helps this is what it looks like ,it's one from a radio I am restoring. Mick.

murphy512 7th May 2022 9:19 pm

Re: Reconstructing Gram switch shaft, Philips 431A
 
Thanks Mick, yours looks a lot better than mine! Good luck with the restoration.


All times are GMT. The time now is 9:11 am.

Powered by vBulletin®
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.