Hedghog standards converter
I have been ask a few times if I would supply complete Hedghog's or kits but I am not in a position to do that.
I can only supply the PCB's which are in the Offered section of this Forum. Forum member Freya has told me that he is willing to supply complete Hedghog's. So anyone wanting a complete one can get in contact with him. Frank |
Re: Hedghog standards converter
Hi,
thank you both for answering the question I had though about asking but hadn't got around to it ! |
Re: Hedghog standards converter
Hi Peter
Thanks for replying, don't hesitate to ask any question about it. I am really happy that Stephen has decided to provide this service as there is many looking for it. Stephen was one of the first to build a Hedghog. Frank |
Re: Hedghog standards converter
I took delivery of a hedghog converter today built by forum member freya and I have to say I`m very impressed with it.
I love how versatile this unit is by the use of the many toggle switches on the front panel. The unit comes in a neat little case and has a built in modulator. I would like to say thank you to frank for designing this great little unit. Robin |
Re: Hedghog standards converter
Thanks Robin, I am glad you like it. I am sure Stephen has made great job of it.
A lot of credit has to go to Jeffrey Borinsky Forum member ppppenguin on the Golborne Vintage Radio Forum. He introduced me to FPGA's and very generously thought me a lot about them. Prior to that I avoided FPGA's like the plague and would never have considered using one mainly because I didn't understand what they were. Using a FPGA was a turning point in this project and made it into what it is today. Without Jeffrey's help it would have been a very different converter. If anyone is considering designing a converter the thread about it on the Golborne Forum would be a good read. Not for my input but solely for Jeffrey's. He has given a huge amount of information and advice on that thread for anyone wanting to design one. Frank |
Re: Hedghog standards converter
I also have a Heghog which I badgered young Stephen"Freya" into building for me.
It is great.The only thing that would improve it IMHO is a"Made in Cornwall" Sticker! Regards Steve. |
Re: Hedghog standards converter
Hi Steve
I am glad you like it. Stephen makes a great job of them. Frank |
Re: Hedghog standards converter
Hello all,
How critical is the 14.31818 meg crystal, load capacitance, tolerance and frequency stability? |
Re: Hedghog standards converter
Hi Silvered_Mica
Load capacitance = 18pF Tolerance should be 50 ppm or better. A crystal like this one should be fine. Frank |
Re: Hedghog standards converter
1 Attachment(s)
I updated the program so the converter can now convert from 16:9 to both 4:3 and 5:4 as well as converting from 4:3 to 4:3 and 5:4. To facilitate this the top two positions of the tone switch are now used to switch between 4:3 and 16:9 input. The selection of 400 Hz or 1KHz tone is on the DIP switch SW8-D. The new program file and legends to suit can be downloaded from the Hedghog web page.
Frank |
Re: Hedghog standards converter
I've just noticed the spelling - without a central E!
Why is this? Steve |
Re: Hedghog standards converter
Hi Steve
It was a spelling mistake I made on the first lot of PCB's I got made. I though why not? and decided to keep it that way. :) Frank |
Re: Hedghog standards converter
The spelling of Hedghog immediately puts me in mind of the town Bridgwater, in Somerset. Works well for me!
|
Re: Hedghog standards converter
One consequence is that if doing a internet search it helps to filter out the unwanted results:D
Frank |
Re: Hedghog standards converter
Quote:
I am still curious, is there any particular connection with the project to the prickly critter? |
Re: Hedghog standards converter
The front panel's a bit 'prickly'.
|
Re: Hedghog standards converter
Hi Graham
No particular connection but as Brigham has said the toggle switches do look just a little bit spiky:) Frank |
Re: Aspect ratio
1 Attachment(s)
Quote:
The latest version of the Hedghog firmware does aspect ratio conversions of 4:3 => 4:3 4:3 => 5:4 16:9 => 4:3 16:9 => 5:3 It does this by cropping the beginning and ends of each line by the appropriate amount. I have uploaded a picture of a 16:9 input with each of the above conversions applied to it. Frank |
Re: Hedghog standards converter
What's the RF output level of one of these units?
Steve |
Re: Hedghog standards converter
It measures 74dB with respect to 1uV on all the ones I have produced which is practically the same as the Aurora I think.
Happily runs 3 sets no problem |
All times are GMT +1. The time now is 12:24 pm. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.