UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Repair and Restoration Services Wanted (https://www.vintage-radio.net/forum/forumdisplay.php?f=145)
-   -   3D Facilities for two Plastic Side Pieces – Solartron A100 Oscilloscope? (https://www.vintage-radio.net/forum/showthread.php?t=179731)

Chris55000 4th May 2021 6:53 pm

3D Facilities for two Plastic Side Pieces – Solartron A100 Oscilloscope?
 
Hi!

I'd there any Member who has a 3d Printer able to 3D print me two small plastic side–pieces in black with two countersunk holes, for the side trim–pueces to complete a Solartron A100 Oscilloscope please?

I got a rack–mount one plus another from Bill Nichols but neither have these pieces!

I can make fully dimensioned drawings but don't have the skill to work out how to make a "3D–ready" printer file – I don't have a 3D printer so I've not had chance to learn the software!

Chris Williams

Chris55000 5th May 2021 10:37 am

Re: 3D Facilities for two Plastic Side Pieces – Solartron A100 Oscilloscope?
 
1 Attachment(s)
Hi!

Just to clarify, these are the two pieces I would like printing if possible!

Chris Williams


All times are GMT. The time now is 6:25 pm.

Powered by vBulletin®
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.