Dial test software for free
1 Attachment(s)
It is obviously not new, but I found it this week, I have tested it and find it suitable for dial testing.
What is the drawback? 1) The text on the buttons are in German so we need to make a short translation picture, but the readings are clear and understandable. 2) you need an RS232 port, (I have an adapter USB-RS232) To the point: Here is the link: http://uuplds.net/file/a7p53Ixq Download the link, run the file, and it asks for the serial port, type the number of the port, and Enter (twice), Then adjust EP to at least 2 to not get resonant pulses, then just start measuring. I have just used pin 9 and 7 and tested the pulse contacts, or complete telephone, and that works so well. dsk |
Re: Dial test software for free
|
Re: Dial test software for free
In my last life as a backup mtce bloke, I always found ( in the back of beyond in some UAX 5 AREA) that the old crude, but time honoured method of 100 ,1000 and 1 worked well enough to rectify problems. Dials could be speeded up/slowed down by tweeking the governor vanes to get dial to meet this .
|
All times are GMT +1. The time now is 1:14 pm. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.