UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Forum Announcements and Comments (https://www.vintage-radio.net/forum/forumdisplay.php?f=18)
-   -   The Thanks Thread (https://www.vintage-radio.net/forum/showthread.php?t=60832)

electronicskip 16th Mar 2018 6:26 pm

Re: The Thanks Thread
 
Thanks to Captainpugwash for the Bang & Olufsen Beocenter4000. Took me about 30mins just to get it out of the fantastic wrapping!!!

Nymrod121 19th Mar 2018 6:38 pm

Re: The Thanks Thread
 
A belated thank you to 'Scottart' for the Avo 8 NOS movement - very well packed! A pleasure meeting you at Harpenden. :thumbsup:
Guy

greg_simons 19th Mar 2018 8:53 pm

Re: The Thanks Thread
 
Many thanks to norman rayburn who above and beyond the call of duty has donated to me a bush dac90 chassis to complete a restoration project.
greg.

TonyDuell 25th Mar 2018 6:25 pm

Re: The Thanks Thread
 
A big 'Thank you' to the organisers of the sale and open day today at the BVWTM, and those who attended and made it such an enjoyable event.

Nymrod121 26th Mar 2018 2:50 pm

Re: The Thanks Thread
 
Many thanks to Robin (robinshack) and his good lady for packing & posting to me an American-style 3-pin connector + 'line cord', safely received today.

Now to get that HP1900A Pulse Generator up and ... er ... well ... generating pulses, I suppose! :)

Cheers
Guy

Reelman 26th Mar 2018 10:14 pm

Re: The Thanks Thread
 
Many, many thanks to Stevie342000 for supplying an electronic copy of a manual so quickly.
Completely out of the blue I asked if he could help with any sort of information, within an hour or two I had the complete manual.
Oustanding!

Thanks again,

Peter.

Tyso_Bl 28th Mar 2018 9:49 pm

Re: The Thanks Thread
 
Thanks to Richard (electronicskip) for the D-link dongle.

Much appreciated, and put to use as I type,

T

electronicskip 29th Mar 2018 3:56 pm

Re: The Thanks Thread
 
Many thanks to ianj for the radio.

Davewantsone 30th Mar 2018 5:13 pm

Re: The Thanks Thread
 
Many thanks to Mickey405 for the TV50.

MarkAT6 2nd Apr 2018 7:28 am

Re: The Thanks Thread
 
Thanks to Ianj for the Bush VHF71 radio.

Craig Sawyers 2nd Apr 2018 1:54 pm

Re: The Thanks Thread
 
Thanks to Dickie (Richard) for the excellent Tektronix 515 oscilloscope manual!

dave walsh 5th Apr 2018 1:25 pm

Re: The Thanks Thread
 
Many thanks to Bill [Moderator] Darius [y-killer] and Mike Phelan for forming a human chain, all the way from Bradford through West Yorkshire, in order to get some magazines to me at Golborne on Sunday-"Proper Chaps" as we say over the border:clap:

Dave W
Ramsbottom

The Philpott 6th Apr 2018 1:26 pm

Re: The Thanks Thread
 
Thanks to Alan (Goldie99) for sending me heated shoe insoles just for the price of postage! The heat's concentrated right where it should be- at the front end. NiMH's on the cards i think- high charge density and the higher self discharge rate won't matter.

Dave

electronicskip 9th Apr 2018 3:02 pm

Re: The Thanks Thread
 
Many thanks to Dave nt for the scanner and the B/W TV , nice to meet you too.

vinylspinner 10th Apr 2018 2:11 pm

Re: The Thanks Thread
 
Many thanks to Mikey405 for the HP printer, cleaned up well and works a treat.

Thank you very much.

Nigel

HamishBoxer 10th Apr 2018 8:26 pm

Re: The Thanks Thread
 
Thank you GroovyG (Graham) for the insulators etc.

Dickie 11th Apr 2018 4:33 pm

Re: The Thanks Thread
 
Many thanks to Peter Sol for going out of his way and delivering a 6A7 valve to my doorstep.

yampy187 16th Apr 2018 12:02 pm

Re: The Thanks Thread
 
Many thanks to Dave (dseymo1) For the TX100 service manual.

Also big thanks to Davewantsone For the Multiview T35 firmware.

Regards,

Jan

marconi_pete 18th Apr 2018 10:58 pm

Re: The Thanks Thread
 
Many thanks to Paul Sherwin for the audio output transformer he sent me. I have installed it in the Pye and it works well.

Regards,
Peter

Goldie99 20th Apr 2018 12:07 pm

Re: The Thanks Thread
 
Many thanks to Electronicskip for the Cyclone Micro 2+, which just arrived well packed, and undamaged.

Regards,
Alan


All times are GMT +1. The time now is 8:18 pm.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.