UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Forum Announcements and Comments (https://www.vintage-radio.net/forum/forumdisplay.php?f=18)
-   -   The Thanks Thread (https://www.vintage-radio.net/forum/showthread.php?t=60832)

G4XWDJim 21st Oct 2015 1:14 pm

Re: The Thanks Thread
 
Many thanks to Andy, Dr Wobble for his generous gift of a speaker which fits perfectly and sounds excellent.

Jim

SiriusHardware 29th Oct 2015 8:45 pm

Re: The Thanks Thread
 
Grateful thanks to Andy, (Dr Wobble) and Barrie, (Bazz4CQJ) who both freely offered some small capacity SD cards in response to my request in the 'Wanted' section. I now have exactly as many as I need - thanks again, gents, much appreciated.

Ambientnoise 1st Nov 2015 2:13 pm

Re: The Thanks Thread
 
Many thanks to Mike (CobaltBlue) for the IFTs for a Cossor 524. Thats another set saved and being used.

Ken

martiR2R 1st Nov 2015 3:48 pm

Re: The Thanks Thread
 
Many thanks to unrealdave for taking the trouble to post one of his excellent PC's.

deliverance 5th Nov 2015 10:24 am

Re: The Thanks Thread
 
A big thanks to Ed Dinning for rewinding my transformer and his helpful information . Also thanks to 60 oldjohn in providing a knob for my brt-402 thanks guys .

julie_m 5th Nov 2015 3:30 pm

Re: The Thanks Thread
 
Thanks to surreynick for the Ultra 950. That's my winter project sorted out ..... ;)

sentinel040 8th Nov 2015 3:02 pm

Re: The Thanks Thread
 
Thank you to AlanC for all his hard work in distributing a large collection of ex-PMR kit from a silent key. I know at least some of it has gone to a good home.

Ian

Radio Wrangler 9th Nov 2015 9:24 am

Re: The Thanks Thread
 
I'd like to thank Humber888 for the HP3580A audio spectrum analyser. I've finally got it home and the microwave roundtable meeting out of the way, so I've been able to try it out properly.

I'd like to thank John_BS for transportation, and Doug for temporary storage in Harrogate until it could get picked-up.

David

Mikey66 9th Nov 2015 2:08 pm

Re: The Thanks Thread
 
A thank you to Greg Simons for the TX9 service manual.

greg_simons 11th Nov 2015 5:40 pm

Re: The Thanks Thread
 
Many thanks to ppmunro for finding a new terminal post for my old and faithful avo mk3.

deliverance 13th Nov 2015 5:56 pm

Re: The Thanks Thread
 
Many thanks to merlinmaxwell for supplying me with the correct bulgin plug speedy service .

Mikey66 16th Nov 2015 10:38 am

Re: The Thanks Thread
 
Thanks to unrealdave for the HP PC he posted out. It works a treat.

bikerhifinut 16th Nov 2015 9:34 pm

Re: The Thanks Thread
 
Thanks to Ed Dinning for his patience and knowledge of transformers, and also Mike Barker for the same. Advice and knowledge that has been beyond price.

andy.

6110c37 17th Nov 2015 10:58 am

Re: The Thanks Thread
 
Many thanks to Keith (G4UKW) for the loan of the Sussex manual. I now have a working tester and a manual specific for my tester which does depart from the original somewhat.
Martin

vinrads 21st Nov 2015 10:36 pm

Re: The Thanks Thread
 
Many thanks to Jon a.k.a Ti Pwun for sending me a speaker FOC I thought that I would trouble in obtaining one of these , but Jon came to the rescue . A big thank's from Mick :thumbsup:

Mikey66 22nd Nov 2015 4:08 pm

Re: The Thanks Thread
 
My thanks to Wendymott for the isolating transformer. Nice to meet and chat to you.

paulsherwin 22nd Nov 2015 4:12 pm

Re: The Thanks Thread
 
Another vote of thanks to Unrealdave for taking the trouble to courier a PC to me, and at an excellent price too.

AC/HL 22nd Nov 2015 6:03 pm

Re: The Thanks Thread
 
Same here, an early Christmas present to replace my old XP machine.

martiR2R 22nd Nov 2015 6:29 pm

Re: The Thanks Thread
 
And here. These are very nice machines and excellent value.
Martin

ITAM805 25th Nov 2015 11:56 am

Re: The Thanks Thread
 
A big thankyou to Ron Bryan for the period 250k pot and the Wima cap for my AC30 restoration - perfect! :thumbsup:


All times are GMT +1. The time now is 10:16 pm.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.