Re: The Thanks Thread
 

Big thanks are due to Captainpugwash (David) for the big HMV DIPLOMAT.

What a beast!

Cheers David:beer:

Re: The Thanks Thread
 

Many thanks to G8UWM-MildMartin for posting a set of PCBs for the Sussex Valve Tester. Posted on Monday, arrived here in Germany on Friday :D

Re: The Thanks Thread
 

A big thank you to John (Oldjohn) for finding me a replacement knob for my Pye P33.

Cheers John!:beer:

Re: The Thanks Thread
 

I would like to say thank you to Frank (Nuvistor) who helped me attach pictures using my iPad. Thank you again Frank.
Cheers
John

Re: The Thanks Thread
 

A massive Thank you goes to Shuttle,
whom not only kindly offered FOC a couple of Fergy TX manuals (in absolute pristine condition too :thumbsup:) on here, But also posted them out to me FOC as well which I thought was incredibly generous of him, excellently well packed too I might add. :thumbsup:

Thanks once again Shuttle, at least have a couple of forum :beer: on me.
Cheers,
Baz

Re: The Thanks Thread
 

Many, many thanks to Bill (AC/HL) who kindly gave me an EPROM programmer, which worked flawlessly. I now have a completed Orton ZX79 computer!

Re: The Thanks Thread
 

Many thanks to Davidh1041 for sending me a Stella/Philips tuner FOC and for packing it securely and sending with the carrier of my choice. Most grateful.

Re: The Thanks Thread
 

Thank you to David G4EBT for identifying the type of displays used for the Velleman K2625 tacho kit for me and for posting a link to a source at Rapid electronics. :thumbsup:

David

Re: The Thanks Thread
 

Big thank you to Jeremy (Pamphonica) for agreeing FCS for a Marconi 538 to RWB.

Jerrt

Re: The Thanks Thread
 

Thanks to Phil, pbengtech, for the precision resistors.

They are beautiful and chunky!;D

Re: The Thanks Thread
 

Ditto to Phil/pbengtech, high quality resistors received today.
Dave

Re: The Thanks Thread
 

Thanks to Ian, Northyorks1 for the DAC90A back and AC11 dial glass and scale.

Sent FOC, impressive packing, instant delivery.

MANY THANKS!

Re: The Thanks Thread
 

Many thanks to Guy Westcliff for bringing the KB AR21 safely northwards.

And to Mike, Crackle, for the set. It's one I've always fancied, being given one as a kid (6) it was what started me going on radio and electronics. I've been looking at little details that snapped into recall, and I've been smiling like a right idiot.

Wonderful


David

Re: The Thanks Thread
 

Thanks to Bill for finding me a heat gun and posting it well-wrapped. Arrived today. cheers, Mark

Re: The Thanks Thread
 

Thanks to Rob (whiskas) for a nice box of computer bits - hours of fun for self and son...

Re: The Thanks Thread
 

A big thank you to Peter aka Reelman who went way (way way) beyond the call of duty in transporting some kit for me today. Pleasure to meet you sir. I am very grateful.
Thanks too to Chriswood1900 for careful wrapping. Very happy.
Ps. Just paid Chris.

Re: The Thanks Thread
 

Thank you to Stephen (Freya) for building and sending the Hedghog II.

Of course also many thanks to Frank C for all his hard work designing this little marvel and making it available to us.

Seasons greeting to all.

Re: The Thanks Thread
 

Many thanks to Malcolm G6ANZ for the anglepoise lamp received today ...
... and many thanks also to Richard (mole42uk) and Josie for delivering it on their way to 'Crucible country'.
Kindest regards to all,

Guy

Re: The Thanks Thread
 

Many thanks to Rob (robinshack) for the six valves, safely received by post on Friday - all cosy & safe - "valves in blankets", perhaps ... :)
All the best
Guy

Re: The Thanks Thread
 

A big thanks to Chris ( cdm1christopher) for the plug which arrived today cheers .

Re: The Thanks Thread
 

Thanks to Rob (Whiskas) for the DVD's, they arrived safely today.

Re: The Thanks Thread
 

Mine arrived safely yesterday too, thank you.

Re: The Thanks Thread
 

Big thanks to David (Captainpugwash) for kindly sending me a knob for a Leak tuner/amp I'm restoring.. Much appreciated!

Thanks to Llama.
 

Thanks to @Llama for the Radiospares push-pull/QPP output-transformer which arrived here safely a couple of days back.

It'll be put to good use - probably as a 'modulation' transformer in a Codar AT5-clone I'm thinking of building.

Cheers!

Re: The Thanks Thread
 

Many thanks to CDM1Christoper for the very careful packing and prompt arrival of the ECC83's.

Re: The Thanks Thread
 

Special thanks to Mike Barker,
For his really superb Philips 17tg100u Line output transformer rewinds, better than the Philips originals!

Dave.

Re: The Thanks Thread
 

Thanks to Rob (Whiskas) for the cases, and for the super quality packaging!

Re: The Thanks Thread
 

Thanks to Rob (Whiskas).
DVDs arrived safely yesterday.

Re: The Thanks Thread
 

Many thanks to Steve_Bell for the shaft covers for my Murphy A362, it'll be back in the kitchen this weekend.

Cheers Steve.:thumbsup:

Re: The Thanks Thread
 

Usually, it's a "Thank you" for receiving a much needed item. But not in this case. My many thanks to Frank - Nuvistor - for his idea that if the RTCs are not the same on two network-connected PCs, one will not 'see' the other.
O.K., so it may have been an 'off-the-wall' idea, but it fixed the problem. All-in-all, just goes to show that sometimes a 'Really? - I doubt it!' :-/ suggestion is actually right on the money. :-) There is clearly a moral here . . . .

Al. / Jan. 22, 2020

Re: The Thanks Thread
 

Thank you to Dickie over in St. Albans for the Weller TCP spares (Tagboard & Spring*) which arrived today. These are now installed and the iron has been tested and works perfectly :thumbsup:
Guy

(* office neighbours to those other well-known legal firms - Wright Hassle & Co. / Messrs. Sue, Grabbit & Run ;) )

Re: The Thanks Thread
 

Many thanks for Alan (Goldie99) for the 30-way connector! Much appreciated :)

Re: The Thanks Thread
 

Thank you to Jerry (cathoderay57) following my recent wanted post for putting me in touch with someone who was able to help.

T

Re: The Thanks Thread
 

I’m sure this will be the first of many but very special thanks to Norman Raeburn for his generosity in offering so many items to forum members. Mine arrived today perfectly packed.
Thanks again Norman, exceptionally good of you.

Peter

Re: The Thanks Thread
 

Many thanks to Terry (terrybull) for the Sony audio docking system that arrived safely today.
Enjoying my lunchtime bacon butty/foot-tapping away to Tina Turner ('Nutbush City Limits") from my iPod.

Superb! :)

Cheers
Guy

Re: The Thanks Thread
 

Thanks to David G4EBT for all the germanium transistors and the lovely note.

Nick.

Re: The Thanks Thread
 

Thanks to Rob (whiskas) DVD box set arrived safely today.

Re: The Thanks Thread
 

Thanks to Dave (Davewantsone) for the KB DR10 he generously gave me the other night. Nice to meet you and your tellies!

Re: The Thanks Thread
 

Big thanks to Norman (Raeburn) for the IC’s which arrived today. Great selection which will be very useful to me.

Kev

Re: The Thanks Thread
 

A board meeting has been convened at Nymrod Towers - courtesy of davidbi
Many thanks, David! :)
Guy

Re: The Thanks Thread
 

Another thanks to Norman Raeburn for a substantial tube of logic chips - that's my Sunday afternoon booked then...great stuff!

Re: The Thanks Thread
 

Many thanks to Rob (whiskas) for calling by yesterday - and which involved quite a diversion from his original journey - to deliver a Sony Blu-ray/DVD player with mains lead, remote inc. batteries, Blu-ray disc of 'Gavin & Stacey' ... and a toroidal transformer.
Great to meet you Rob :thumbsup:
Cheers
Guy

Re: The Thanks Thread
 

Many thanks to ChrisKt for the Solar radio.

After such excellent packaging the radio has been received in the correct number of pieces!

Again, Many thanks, much appreciated.

Peter

Re: The Thanks Thread
 

Hello.

A big Thank You to (David G4EBT) For sending me the Bush Transferes.

Regards
Kevin.

Re: The Thanks Thread
 

Thanks to Dave_n_t for the selection of transistor driver/output transistors which arrived a day or so back.

Now, where did I put that bag of NOS AC128s and OC81s??

--Pete

Re: The Thanks Thread
 

Many thanks to WHISKAS TERRY BULL STEVE HERTZ and 1955 APPREW all of whom have forwarded much needed items to me with a professional standard of packaging and a good sense of humour. I'm working from more recent entries in the PM list so apologies but similar appreciation to anyone that I've inadvertently overlooked in this message!

Dave W:thumbsup:

Re: The Thanks Thread
 

And another big thank you goes to Norman Raeburn for the Advance P1. A quick test and it appears to be working beautifully, even at the very top end of its range.:clap:

Cheers,
John.

Re: The Thanks Thread
 

Many thanks once again to ChrisKt for the Philips cassette, blanks and tapes.

Another great job of packaging and very useful. I remember buying one of the tapes myself in 1968!

Again, Many thanks, much appreciated.

Peter

Re: The Thanks Thread
 

Thanks to Rob (Whiskas) for the transformer, and careful packing.

Thanks to Ed
 

Belated Thanks to Ed (Dinning) for a boxful of feedthrough capacitors of various sizes. They are all super high- spec components and will be a big help in the build of my current major project.

Thanks again for your generosity, Ed , both with giving freebies and with abundantly -given practical advice , particularly around the materials science aspect of a build .

Cheers!

Al