T1154 Original PSU details - info request
 

I'm currently trying to setup my dynamotor as close as possible to the original PSU. Bought this dynamotor years ago and recently checked it and it spins when 24v is applied.

Before continuing I would like to find out how to connect this dynamotor correctly (see attachment), but some details are missing and I don't have detailed photos of the original setup. When applying 24v volt to the rotor everything works, but I still have 2 unassigned connections available which are not clear to me.

Any help is very much appreciated :thumbsup:

Kind regards

Re: T1154 Original PSU details - info request
 

The attached pdf might help.

Andy

Re: T1154 Original PSU details - info request
 

Andy,

This definitely helps. Didn't have this manual yet. Let's see if it answers my questions after reading

Thanks for sharing!

Re: T1154 Original PSU details - info request
 

Although this is providing much more detail than I had before, I still looking for a close up photo or precise wiring diagram for what I indicate as the stator winding (< 0,5 ohm).

24v/0.5ohm = more than the 16A running current