Re: The Thanks Thread
 

Thank you to mole42uk (Richard) for the Avominor that arrived safely this morning.

David

Re: The Thanks Thread
 

Many thanks to Julesomega (Julian) for the FOC National Panasonic Tape Recorder Technical Guide that arrived this morning, looks like loads of interesting reading material.

David

Re: The Thanks Thread
 

Huge thanks to Steve Bell for donating a Bush TR82C to the Black Country Living Museum, for display in its ‘new’ 1959 radio and TV shop Stantons. Opening in 2023! Thank you, Steve :thumbsup:

Re: The Thanks Thread
 

Hi!

My grateful thanks to Member "Dickie" Richard for his gracious assistance with bookwork – TF1313A RCL Bridge and TF2202 Oscilloscope books safely received and archived!

Chris Williams

Re: The Thanks Thread
 

That'll be interesting, i well remember stantons although by the time i was on the scene they were mainly a record shop and sold a few accessories like styli and cartridges etc, about 1967.
Greg.

Re: The Thanks Thread
 

Thanks to Steve_Bell for the 6Q7 for my Barker 88. Much appreciated. Jerry

Re: The Thanks Thread
 

Many thanks to dazzlevision for the emailed Operating Instructions manual for the Ferguson 3216 R2R and other associated documentation.

David

Re: The Thanks Thread
 

Thank you to Dickie (Richard) for the yellow hook up wire that arrived this morning, it will come in handy.

David

Re: The Thanks Thread
 

Thanks to andrewferguson for the neat little Pye tuner that arrived safely yesterday, very well cushioned in its box- if only all suppliers paid similar attention to packaging. A "proper" tuner with sturdy air gang variable and well put together, I haven't traced the DC powering arrangement through yet but three IF filters and a 3SK73 RF stage suggest good VHF/FM capability and LW adds a bit of casual DX interest plus "storm approaching" heads-up!

Colin

Re: The Thanks Thread
 

Hello,

Many thanks to Richard (mole42uk) for the Clavioline manual.

Crikey, it’s a fearsome gadget, the restoration of which, will no doubt keep me out of trouble for a while.

Interesting... the idea of an astable multivibrator with one CR network and not two.

Regards
Terry

Re: The Thanks Thread
 

Thanks to AC/HL Bill for the AVO bridge .

Re: The Thanks Thread
 

Big thank you to Daniel (dglcomp) for selling me his spare Scart to HDMI converter. :thumbsup:

Re: The Thanks Thread
 

Thankyou to frankmcvey for the GPO Multimeter 14C that safely arrived yesterday, look forward to trying it out.

David

Re: The Thanks Thread
 

Many thanks to cathoderay for the journal detailing the restoration of a portarama, i will no doubt take up the offer of bvws membership.
Greg.

Re: The Thanks Thread
 

Thanks to deliverance re the farnell scope I was a real treat to meet with you scope aside
Your passion can be clearly seen
It was a real experience
Trev

Re: The Thanks Thread
 

Many thanks to 'WaveyDipole' for the Dell soundbar - it clipped straight on in 2 seconds, and works perfectly. That's 2 more empty gaps on the desk (to be refilled no doubt...).
Cheers,
Alan

Re: The Thanks Thread
 

Like to thank Bob Moss for the EKCO HT unit,

It's given me the incentive to get two projects on the the go.

Cheers

Mike T

Re: The Thanks Thread
 

Thank you to WaveyDipole for the Levell TG66A Oscillator that safely arrived today.

David

Re: The Thanks Thread
 

Many thanks to PhilDill for the leaflet and carefully packed.

Best Regards,

David

Re: The Thanks Thread
 

Thanks to Graham (Analogue Man) for two very nice Lenco 75 arms, beautifully packed.:thumbsup:

Re: The Thanks Thread
 

Many thanks to Ed Dinning for the Trophy 5 and making Pam and I welcome on collection today.
Good to talk.

Regards,
David +Pam

Re: The Thanks Thread
 

Many thanks to Analogue Man for the Goldring GL75 arm. Excellent replacement for my much corroded arm on my GL75 deck. Excellent service.
Nick

Re: The Thanks Thread
 

Many thanks to marconi_pete 5 valve portable radios have arrived Autumn/Winter projects sorted.

Adrian

Re: The Thanks Thread
 

Another big thanks to Steve.seven for the Eddystone and also the Burndept radio which i didn't intend buying!! but couldn't resist it .
Nice to see you again.

Re: The Thanks Thread
 

Good to meet you again Richard, hope you enjoy the radio's.
Regards,
Steve.

Re: The Thanks Thread
 

Thanks to Ed Dinning for the Avo 8

Re: The Thanks Thread
 

I would like to thank Barry for the 78 records! There are some great ones amongst them I have fired up the Dansette and I am listening to "stupid Cupid" I am ready to turn the volume down when Winnie Atwell drops onto the turntable I'm sure they wheeled the piano off with smoke coming out of it after some of her recordings!
Thanks Barry !
:thumbsup:
Rich.

Re: The Thanks Thread
 

i would like to thank all on this site for all the info they have given latley,the latest being the fidelity record player which has thown up all sorts of discusions regarding the motor failure,the advise as ever is exellent and no doubt i will need more help to get it working as it should,sincere thanks all ,tony

Re: The Thanks Thread
 

Thanks to Wavey Dipole re the book on phase locked loops
Very technical possibly above my level but I will try to read it and then pass on to the forum again
Trev

Re: The Thanks Thread
 

Thanks to Northyorks 1 (Ian). Decca Debonair transistor portable delivered safely.

Cheers,
Greg.

Re: The Thanks Thread
 

A big thanks to Bob Moss for sending me the b7g plug for free , cheers Mick.

Re: The Thanks Thread
 

A big thanks to Trevor for gifting me a Heathkit V-7A and posting it for free and refused payment a generous offer thanks again Cheers Chris.

Re: The Thanks Thread
 

Hi!

My grateful thanks to Trevor for the Dartron D12 scope who's arranged to meet me at Diss Station with it for me on Monday!

The rebadged "Mitte D47" I bought last year has a u/s mains transformer, so the D12'll help me get it going !

Chris Williams

Re: The Thanks Thread
 

Hi!

My very grateful thanks also to Member "Silvered Mica" Wayne who has offered me a small jiffy bag of parts to help me get started on the Hedgehog Mk. 1 converter!

I will donate something to the RNLI on his behalf for these!

Chris Williams

Re: The Thanks Thread
 

A big thanks to unitelex ( Chris ) for repairing my Nakamichi 582 tape deck which now sounds wonderful and for addressing extra issues a very professional service thanks again Chris.

Re: The Thanks Thread
 

Many thanks to whiskas (Rob) for the Tandy 14 headphones that safely arrived yesterday and were very well packed.

As described they look like new/unused and work well.

David

Re: The Thanks Thread
 

Hi!

My thanks to Dave McMahon for a copy of the Truvox 90 service manual, cheerfully emailed to me in response to a polite PM request!

(Note:– not available "up top" – I did check first before requesting it!)

Chris Williams

Re: The Thanks Thread
 

Very many thanks to Granitehill for sending me a replacement mains transformer and filter for my Lafayette HA-350 project. All for cost of postage - brilliant! Jerry

Re: The Thanks Thread
 

Many thanks to Mrs Diana Powell, who kindly donated and delivered a good working Mullard CRT to the Black Country Living Museum.

Re: The Thanks Thread
 

Many thanks to Adrian (ADRIANH) for the AVO 8 MK V, and a nice brew. It's just the right incentive to get my next project started. Cheers Adrian! :beer:

Re: The Thanks Thread
 

Many thanks to David (Radio Wrangler) for delivering the B&O today.
It was great to meet you.
Kind regards,
David

Re: The Thanks Thread
 

Big thanks to Dragonser for the test leads, will allow some ancient test meters to live again!
Peter

Re: The Thanks Thread
 

Thanks go to Pamphonica for the HP grabber clips. Look to be very good quality,

John.

Re: The Thanks Thread
 

Many thanks to Superscope (Ian) for the two Megger LT3 earth loop testers, which safely arrived on Friday.

David

Re: The Thanks Thread
 

Hi!

My grateful thanks to Member "Electrical" Stan for the Black Star 1410 Manuals, they were perfectly clear and readable, absolutely no problems!

My job now is to return the favour by getting on with the drawing of some of my own gear and uploading some of my own work!

Chris Williams

Re: The Thanks Thread
 

A huge thanks to forum members defender and Radio Wrangler for arranging to courier an isolation transformer from Huddersfield to Scotland.

Picked it up yesterday over a very enjoyable lunch at the Red Lion in Culross - thanks again David it was good to meet you.

Re: The Thanks Thread
 

Thanks to David Mcmahon for the slider cap - much appreciated.

Chris

Re: The Thanks Thread
 

Thank you to Rich (Slidertogrid) for the turntable Circlip, much appreciated.
John

Re: The Thanks Thread
 

Very many thanks to Mike [Mikey 66] for the supply of enough special 2N7 caps to complete my G8 project. I have a Roberts G8 soon on the bench [one I sold new!]to use the extra capacitors you kindly supplied. Regards, John.

Re: The Thanks Thread
 

A big thank you to unitelex (Chris) for the homemade cam rollers (very professional looking) plus diodes and resistors.

David