Bush DAC10 front of case logo
Hi all
Restoring the case on my Bush DAC10 but am missing the logo that is on the front. I have seen a photo of what I think it should look like but cant see the detail. If anyone could help with a good photo of the logo that I could use to stick in position or better still an original logo or a place to get one from. Thanks chaps, I love this Forum. pwood13660@blueyonder.co.uk Paul http://i988.photobucket.com/albums/a...oman/DAC10.jpg |
Re: Bush DAC10 front of case logo
2 Attachment(s)
Here you go
|
Re: Bush DAC10 front of case logo
Thanks for that Chris, that was quick.
Is the logo made from metal or is it embossed printed paper? Thanks again, Paul |
Re: Bush DAC10 front of case logo
1 Attachment(s)
Here's a scan of mine at 1200 d.p.i.
Hope that helps. |
Re: Bush DAC10 front of case logo
Soft metal
|
Re: Bush DAC10 front of case logo
Quote:
If you pm me with your email address and I'll send the the file (only 208k). It's made out of soft metal foil - an old-style milk bottle top would do nicely. |
Re: Bush DAC10 front of case logo
Thanks Chris for the info, and thanks Dennis for the pic.
Dennis, will pm you my email for the bigger photograph. Paul |
Re: Bush DAC10 front of case logo
Hi Paul. I had exactly the same problem a while back. Most of these badges fall off. I can't find it now but there is an excellent way to make these on the forum somewhere using two small cut out cardboard trees and a piece of kitchen foil. Results cannot be told from the original.
|
Re: Bush DAC10 front of case logo
Thanks Dave, will try and find the info, sounds like fun.
Paul |
Re: Bush DAC10 front of case logo
|
Re: Bush DAC10 front of case logo
Thanks for that Dave.
Thanks again to everyone who has helped with this, give me something to do at the weekend. I love this Forum Paul |
Re: Bush DAC10 front of case logo
Hello Paul
Member Aerodyne was good enough to send me the artwork he created for a badge. I don't think he will object if I send you it. Maybe you could PM him to ask? Cheers Ian |
Re: Bush DAC10 front of case logo
Thanks Ian
I have just PM’ed Tony to ask. Thanks, Paul |
Re: Bush DAC10 front of case logo
Hello, try this one, worked for me, printed correct size, I just applied a small coat of clear lacquer to it, after I applied it to the radio
|
Re: Bush DAC10 front of case logo
1 Attachment(s)
Sorry, Try Again:thumbsup:
|
Re: Bush DAC10 front of case logo
Paul,
Have another go. That one doesn't work. Alan |
Re: Bush DAC10 front of case logo
Alan
worked for me, you have to save the image by right clicking, then save image as. cheers Mark |
Re: Bush DAC10 front of case logo
Mark,
Ah, so. I did that, but Corel says it's only 34 pixels wide and 44 pixels high :( Alan |
Re: Bush DAC10 front of case logo
Sorry Alan, should have mentioned it is not a compressed image,
Copy, Paste & print, and it should be the correct size. |
Re: Bush DAC10 front of case logo
Paul,
Ah, so, again. It realy is a tiny image. Paint printed it OK. Alan |
All times are GMT +1. The time now is 6:35 am. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.