Cleaning B&O Hifi Cabinet parts
 

As usual they have the brushed aluminium finish etc in this case for a Beomaster 901 plus other parts.Looking for some guidance for simple clean and wipe over for the unit including wood works etc after completion of minor repair works etc.What the best sprays or cleaners to make these a bit more presentable,they are not seriously tarnished or stained and come from pet free and smoke free home enviroment.:)

Re: Cleaning B&O Hifi Cabinet parts
 

A wipe over with a soft cloth with detergent solution is the best first move. I use Fairy liquid. Don't use abrasives.

To finish, I use a soft cloth that's been sprayed over lightly with WD40! It's great for getting rid of fingerprints. The drawback is the characteristic smell. You don't want to get it on anything but the stainless.

David

Re: Cleaning B&O Hifi Cabinet parts
 

Mr Sheen for me.

Re: Cleaning B&O Hifi Cabinet parts
 

Ammonia works well on grubby finger marks, does not attack plastic or painted legends etc
Keep it off the woodwork
Use gloves and good ventilation

Re: Cleaning B&O Hifi Cabinet parts
 

Foaming cleanser works well, but be very careful with lettering. I was once cleaning a Technics cassette deck and to my horror the lettering started to wipe off. I managed to save most of it, but have been very careful ever since.

I also wrecked a Philips tuning scale ages ago when I leapt in without knowing any better.

Re: Cleaning B&O Hifi Cabinet parts
 

Thanks for the heads up Paul-yes made that fatal mistake myself many many years ago on my First day in a workshop! But much the wiser now and the foam claener is very good but mainly for cabinets etc as a general wipe over and rarely use on facias especially anythinhng old as like you say the decals etc were of a different state of etching properties rather than engraved or laser cut.But even then can be issues but great advice and duley noted-Thankyou:thumbsup:

Re: Cleaning B&O Hifi Cabinet parts
 

;D Crikey is that still available?? That used to be excellent in the old days -must have a punt round and see if i can source some.Should add a certain old school scent to the workshop if nothing else!;D Cheers

Re: Cleaning B&O Hifi Cabinet parts
 

Shall Take a look at that many thanks:)

Re: Cleaning B&O Hifi Cabinet parts
 

That sounds a good idea shall give that a try as so many chemicals etc but trying to remain as simple as possible,but the WD40,well it has its propertys but still the smell haunts me from many a customer from years goine by spraying into flaps of VCRs and tape mechanisms that still give me flash backs!;D

Re: Cleaning B&O Hifi Cabinet parts
 

Oooh nasty! must be 20dB harder to clean than the traditional jam butty.

David

Re: Cleaning B&O Hifi Cabinet parts
 

Haha yes,we once had what was the most ridiculous thing at the time ive ever see to belive with a customer coming into the workshop reception with a very heavily wrapped in Bin bags Sony SCL7 VTR! His nephew had managed to spill a tin of paint into the open lid by an assumed accident and enquired if we could help! Well we unwrapped and duley rejected even before making to any bench it was wrecked! The most bizzare thing I have been asked to even consider for many a year gone by,rest assured like many others we have had some right mingers! ;DBut the B&O is more of an after service valet to put close to a quality repair so all help advices have been greatly appreciated,but the WD40 still remains-Uggh the thought of it:wall:

Re: Cleaning B&O Hifi Cabinet parts
 

CIF Lemon on a damp cloth works perfectly for the metal parts but, as above - don't scrub too hard!

Give the woodwork a clean with a damp cloth and some detergent if necessary, let it dry fully and then give it a wipe over with some teak oil.

Re: Cleaning B&O Hifi Cabinet parts
 

Great many thanks for the advice on the Teak Oil,is that suitable for the darker woods aswell or best to go for shade by shade to suit?Yes the Cif is quite friendly to use so long as diluted well.:)

Re: Cleaning B&O Hifi Cabinet parts
 

If it's just to put a bit of a shine and finish things off nicely, then teak oil will do the job for any shade of wood. Obviously if you need to disguise any marks or nasties, then matching the wood finish as best as possible will be necessary.

Re: Cleaning B&O Hifi Cabinet parts
 

Super;DI shall give that a trial and post some pictures as and when completed,just need to check with the owner first regarding the procedure and outcome etc.:)