UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Vintage Radio (domestic) (https://www.vintage-radio.net/forum/forumdisplay.php?f=20)
-   -   First post first question about Philips B2G81U (https://www.vintage-radio.net/forum/showthread.php?t=162939)

mcolliva 14th Jan 2020 12:53 pm

First post first question about Philips B2G81U
 
Good morning all
it's my first post here my name is Marco, 58 years old, living in Turin - Italy.
Recently I bought a Philips B2G81U in poor condition, a lot of rust and many issues.
Issue 1: MW/LW selector broken so think to replace using a switch 2 pole-6 positions but I'm not sure how to connect original wires and components on new one.
Issue 2: on-off switch broken but maybe can replace or repair.
if someone have a close pic of MW/LW selector in both position maybe usefull.
Have a great Tuesday all
MArco

AC/HL 14th Jan 2020 1:13 pm

Re: First post first question about Philips B2G81U
 
Hello and welcome,
The manufacturers service data shows the wiring between the switches and printed circuit: https://www.service-data.com/product...61/6028/m14661

mcolliva 14th Jan 2020 2:29 pm

Re: First post first question about Philips B2G81U
 
Quote:

Originally Posted by AC/HL (Post 1207606)
Hello and welcome,
The manufacturers service data shows the wiring between the switches and printed circuit: https://www.service-data.com/product...61/6028/m14661

Thank you Bill for your fast answer.

telstar 15th Jan 2020 5:33 pm

Re: First post first question about Philips B2G81U
 
Hello.
I am sure that I had a spare chassis for this radio, which of course contains the switches.
Will have a look for you, can not promise anything.
Unfortunately, I am in the process of selling all of my items off.
Mike

mcolliva 15th Jan 2020 5:42 pm

Re: First post first question about Philips B2G81U
 
Hi Mike
thanks in advance for your search, as wrote I could replace broken switches but on MW/LW switch I'm doubtful, looking on schematic frankly doubt remain.
Have a nice evening
MArco


All times are GMT +1. The time now is 10:09 am.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.