UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Forum Announcements and Comments (https://www.vintage-radio.net/forum/forumdisplay.php?f=18)
-   -   The Thanks Thread (https://www.vintage-radio.net/forum/showthread.php?t=60832)

Boater Sam 23rd Mar 2016 12:37 pm

Re: The Thanks Thread
 
Thanks to Norman Raeburn for the Mini-mod coils, another project under way.

Cobaltblue 23rd Mar 2016 10:35 pm

Re: The Thanks Thread
 
I would like to Thank Mike (Mikebay) for the rather nice PYE subject of this thread https://www.vintage-radio.net/forum/...d.php?t=124151

It was a pleasure to meet Mike and have a wander around his shack I just wish I had a few more hours to spare.

Mike and his XYL made me feel very welcome.

Thanks Mike the PYE will be with me for quite some time :thumbsup:

I am sure Mike will be relieved to hear I got back in time to prepare a nice lunch for SWMBO.

Cheers

Mike T

Radiocruncher 29th Mar 2016 2:36 pm

Re: The Thanks Thread
 
I would like to thank Trevor (Valveaudio) for kindly posting me out a dial cord spring for my Roberts R900.

Thanks a lot Trevor its greatly appreciated.

Graham

paulsherwin 29th Mar 2016 8:17 pm

Re: The Thanks Thread
 
Thanks to Bill (AC/HL) for the replacement woofer for my Omar CR251 speakers, and for taking the trouble to post it. Much appreciated.

Herald1360 3rd Apr 2016 10:01 pm

Re: The Thanks Thread
 
My thanks to "terrybull" for the little Pioneer XC-L7 system I picked up today. It's a stylish mini system that sounds pretty good to my ears with a CD playing as I write. It should cheer up the sound from the ghastly speakered holiday cottage compact LCD TV no end when I get a suitable lead!

Radiocruncher 13th Apr 2016 8:08 pm

Re: The Thanks Thread
 
I would like to thank Richard (Dickie) for sending me a donor Dynatron Tourist to help repair mine. Greatly appreciated.

Ti Pwun 14th Apr 2016 8:57 am

Re: The Thanks Thread
 
Many thanks to Richard (Mole42uk) for the V6 VVM.

Also belated thanks to Vince (FIXITNOW) for the D65 scope and to Roger (RojDW48) for the Goodmans Module 80. I had planned to put a thanks post here when I had worked on them but I'm battling health issues so things are taking longer than I expected. Thank you.

SiriusHardware 14th Apr 2016 10:12 pm

Re: The Thanks Thread
 
Thanks from me to 'terrybull' as well, for not only sorting out and sending us a really nice ipod dock but actually fixing it as well after it failed a pre-despatch check.

Ti Pwun 17th Apr 2016 6:34 pm

Re: The Thanks Thread
 
Big thanks to John (raditechman) for the Cossor 338, and especially for taking a bicycle trip to Homebase for a suitable box. Very much appreciated.

neil24-7 18th Apr 2016 7:12 pm

Re: The Thanks Thread
 
I would just like to thank Ed Dinning for checking over my valve tester, a true gentleman and an absolute star.

Cheers Ed :beer:

Phil G4SPZ 21st Apr 2016 1:49 pm

Re: The Thanks Thread
 
A big thank-you to Doug_h for the Avometer and for going out of his way to deliver it :wave:

Radiocruncher 23rd Apr 2016 8:18 am

Re: The Thanks Thread
 
I'd like to thank Glyn (Welsh Anorak) for sending me the Roberts tech specs and trader sheets. Really nice to have the originals. I will of course make them available to other forum members as long as it doesn't conflict with the forum rules regarding service info.

Thanks Glyn

Kind regards

Graham

DangerMan 23rd Apr 2016 5:35 pm

Re: The Thanks Thread
 
I'd very much like to thank Peter (PeterGM4WCE) for the Ekco TC138 and Murphy radio and also for having already brought them down from the loft before we arrived. A very nice surprise indeed.
It was a pleasure to meet you, and thanks again.

Pete

camallison 26th Apr 2016 10:38 am

Re: The Thanks Thread
 
A big thank you to Ti Pwun (Jon) for the 2 PMR radios which arrived this morning. As Jon knows, they will be put to very good use.

Colin

electronicskip 1st May 2016 8:48 pm

Re: The Thanks Thread
 
I second that having received my 2 PMRs also .
thank you Jon.

ajs37 11th May 2016 8:31 pm

Re: The Thanks Thread
 
Big thankyou to Graham-R for offering an Armstrong 526 and to Vinylspinner for delivering it to Bristol - top guys!

trickie_dickie 14th May 2016 11:22 am

Re: The Thanks Thread
 
A BIG thank you to Scott Bouchard for the Voltmeter / Ampmeter which arrived safely today.

Phil G4SPZ 14th May 2016 12:08 pm

Re: The Thanks Thread
 
Many thanks to Michael a.k.a 'LIVEWIRE' for the original Grundig Stenorette manuals from 1955. Perfect, just what I needed :clap:

camallison 14th May 2016 1:32 pm

Re: The Thanks Thread
 
A huge thank you to Cobaltblue for the power supply unit, already put to good use.

Colin

Restoration73 15th May 2016 5:08 pm

Re: The Thanks Thread
 
Very many thanks to standingwave (Terry) for the Sony U-matic manuals.

Tony

Phil G4SPZ 15th May 2016 5:45 pm

Re: The Thanks Thread
 
Thanks to Dave (Dazzlevision) for the very nice Fidelity, and also to Jim Medley for the valves and the excellent lunch at the NVCF today. Much appreciated, gentlemen! :wave:

Nymrod121 15th May 2016 6:20 pm

Re: The Thanks Thread
 
Many thanks to:

- Richard ('Dickie') for the Weller soldering station power supply;
- Ian ('Hermit6345') for the Eddystone 770R;
- Mark ('8 Tracker') for the Tektronix 7623.

A pleasure to meet you all today at NVCF ;D

Best wishes

Guy

poppydog 17th May 2016 10:59 pm

Re: The Thanks Thread
 
I would just like to thank the kind gentleman that gave me a break and found the time to give me the advice and guidance I needed to complete my repair. I have probably aged him 10 years, I even had a bit of a telling off in red ink! But once again thank you very much - you know who you are.
Regards
Poppydog

Ti Pwun 20th May 2016 9:29 am

Re: The Thanks Thread
 
Big thanks to Michael (LIVEWIRE?) for sorting me out with a Roberts R707 faceplate. Very much appreciated.

Jon.

poppydog 21st May 2016 6:45 pm

Re: The Thanks Thread
 
Many thanks to Ed Dining for the parcel I received today.
Regards
Poppydog

gary_crutchley 22nd May 2016 10:37 pm

Re: The Thanks Thread
 
Many thanks to Ed Dining for rewinding the LF Choke for our Cossor 3467. We will get it reinstalled and move forward with the restoration of this set.

SiriusHardware 24th May 2016 6:38 pm

Re: The Thanks Thread
 
Thanks to Ti Pwun, for looking after an Atari STE internal power supply for the best part of 30 years and then wrapping it very carefully before sending it to me.

gary_crutchley 28th May 2016 4:29 pm

Re: The Thanks Thread
 
Portadyne 230 radiogram restoration.

Thanks to everyone who advised on the above, your help is very much appreciated as we have now brought this family piece back to life.

Thanks especially to Boater Sam, Nick the Dentist, Herald1360, Edward Huggins, PW Drive and Phil G4SPZ for all of your invaluable help and advice.

Regards,

Gary

gary_crutchley 28th May 2016 5:14 pm

Re: The Thanks Thread
 
Cossor 3467 restoration.

This was another family heirloom so I am very pleased to be able to report that we have it up and working. As far as I can tell it dates from 1933.

Many thanks to Ed Dinning for rewinding the LF choke for us. Thanks also to Phil G4SPZ for his advice on the smoothing capacitors.

Thanks also to Herald1360, UKCOL, Cobaltblue, Merlinmaxwell, and Andrewausfa who all contributed to the discussion and the outcome.

Many thanks,

Gary

Thyristor 29th May 2016 6:12 pm

Re: The Thanks Thread
 
Many thanks to everyone, for their help, across the several Win 10 threads.

I've now 'seen the light' and am on Win 7 ! :thumbsup:

greg_simons 29th May 2016 10:06 pm

Re: The Thanks Thread
 
Many thanks to Richard aka slider to grid for hunting in the bowels of his stuff for a philips tvette mains lead.
Greg.

1955APREN 31st May 2016 11:16 pm

Re: The Thanks Thread
 
I would to say a big thank you to the following members
Who passed on lots of help in the repair of the Kenwood A97 amp.
Perciva1007
Dr Wobble
Fixitnow
Thanks all of you
Kind regards
Derrick

Skywave 3rd Jun 2016 11:07 pm

Re: The Thanks Thread
 
Re: The repair of an HP LaserJet 4 printer.

My thanks go to Terry, M0TGX; Peter, Dragonser; Kalee 20; Tony Duell; David, Radio Wrangler; Sean Williams; Cheerfulcharlie; Michael, Yesnaby - and also to anyone else who I appear to have overlooked: my sincere apologies. There were so many members who offered advice and suggestions that it has been a bit tricky trying to re-trace the appropriate posts and threads.

By way of a summary report, I have made a brief thread in the 'Success Stories' section.

Al.

Skywave 8th Jun 2016 11:18 am

Re: The Thanks Thread
 
My thanks to Graham, Station X, re: the sale of an Eddystone 898 dial drive.
The quality of the packing was superb and in my experience, simply unprecedented: triple boxed, no less! :clap:

Al.
June 8, 2016

ColinB 8th Jun 2016 8:05 pm

Re: The Thanks Thread
 
Many thanks to GMB for looking into the pictures that are the subject of my "Corrupt JPEGs" thread. Really appreciate the help :)

Ti Pwun 8th Jun 2016 11:51 pm

Re: The Thanks Thread
 
Big thanks to Jim (G4XWDJim) for the capacitor analyzer. Much appreciated.

Ti Pwun 14th Jun 2016 6:28 am

Re: The Thanks Thread
 
Thanks also to Mike (Dual Standard) for selling me his Advance signal generator. Works well.

Jon.

Phil G4SPZ 15th Jun 2016 10:03 pm

Re: The Thanks Thread
 
I'd like to thank Chris (Herald 1360) for selling me a 25 watt Henley Solon in excellent condition, and posting it so carefully packaged :thumbsup: I'd been after another one of these for ages since mine burned out. Thanks Chris.

gary_crutchley 19th Jun 2016 9:49 pm

Re: The Thanks Thread
 
I'd liked to thank everyone who once again helped out with our Portadyne 230 radiogram restoration. In particular Phil G4SPZ, Herald1360, Philips210, Station X, David G4EBT, UKCol, Techman, Nuvistor, Peter_sol, pwdrive, radio_dave, Edward Huggins, AC/HL.

I hope I haven't missed anyone.

Thanks very much all.

Regards,

Gary

camallison 20th Jun 2016 10:40 am

Re: The Thanks Thread
 
Thank you to Nymrod121 for the Gould 5V, 5A power supply that arrived this morning. It is already powering a current project, freeing up my adjustable PSU for other duties.

Colin

Nymrod121 20th Jun 2016 11:21 am

Re: The Thanks Thread
 
My pleasure, Colin :)
Cheers
Guy

Ti Pwun 21st Jun 2016 6:59 am

Re: The Thanks Thread
 
Thank you to Hugh (Stockden) for the Storno TX - much appreciated.

Nymrod121 22nd Jun 2016 9:00 pm

Re: The Thanks Thread
 
Thank you to Jeremy (Pamphonica) for the Microsoft book covering 'MSDOS 6.2. Windows for Workgroups and Windows 3.1'.
Cheers, Jeremy :thumbsup:
Best wishes
Guy

Reelman 23rd Jun 2016 11:26 pm

Re: The Thanks Thread
 
Many thanks to Bryan M for the power leads, just what I needed.
Cheers!

TonyDuell 24th Jun 2016 10:00 am

Re: The Thanks Thread
 
Many thanks to 'Welsh Anorak' for the Panasonic 8-track recorder. It's going to give me hours of entertainment (and that's before I put a tape in it.)

tony brady 25th Jun 2016 5:23 pm

Re: The Thanks Thread
 
thank you to TonyDuell for the Tek 7613 scope mainframe - it was a pleasure to meet you. I hope the mainframe will allow me to fix a couple of my scopes that are in the roundtoit pile!

cheers
Tony

Nymrod121 29th Jun 2016 3:46 pm

Re: The Thanks Thread
 
Many thanks to Nicklyons2 for the 2 x Musa patch panels plus a large quantity of 'U'-links, 2 x PO316 jackfields and the lacing bars to go with them. I'll have to learn how to do cable-lacing now (I knew that scanning in 'BBC ED122' would come in handy sooner or later :) )
Thank you again, Nick :thumbsup:
Guy

paulsherwin 29th Jun 2016 4:08 pm

Re: The Thanks Thread
 
Thanks to Richard (rovernut) for the computer memory, and belated thanks to Ian (whyperion) for his old sewing machine pedal. Both were FOC and they didn't even ask for the postage.

Ti Pwun 2nd Jul 2016 5:19 am

Re: The Thanks Thread
 
Big thanks to Pamphonica (Jeremy) for the wire (and the metal boxes that just happen to accept a panel mount SO259 and a BNC socket without any need for drilling - perfect for a couple of test gear projects I have in mind). Very much appreciated.

Jon.

Ti Pwun 2nd Jul 2016 11:53 am

Re: The Thanks Thread
 
Big thanks also to Phil (pbengtech) for the used Plessey and Hunts caps for restuffing - just the job. Much appreciated.

Jon.


All times are GMT +1. The time now is 11:33 pm.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.