UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Forum Announcements and Comments (https://www.vintage-radio.net/forum/forumdisplay.php?f=18)
-   -   The Thanks Thread (https://www.vintage-radio.net/forum/showthread.php?t=60832)

DMcMahon 27th Jun 2020 5:02 pm

Re: The Thanks Thread
 
Thank you to Steve G4WCS for the BM8/2 Meggar, it has come in very useful.

David

deliverance 29th Jun 2020 1:11 pm

Re: The Thanks Thread
 
Thanks to frankmcvey for the connector speedy service cheers .

DMcMahon 29th Jun 2020 10:20 pm

Re: The Thanks Thread
 
Many thanks to buggies (George) for supply of HV diodes for Solartron scope.

David

eddie_ce 3rd Jul 2020 7:46 am

Re: The Thanks Thread
 
Many thanks to terrybull for sending an interesting excerpt from a book dealing with the introduction of radar and for the speed in which he did so.

AndrewW 4th Jul 2020 3:40 pm

Smiths Sectric Clock
 
1 Attachment(s)
Big thanks to Mike Phelan for fixing our Smiths Sectric Clock. Itís back on the wall and still running fine.

Also thanks to Mike Barker for fixing the coil.

vinrads 5th Jul 2020 9:38 am

Re: The Thanks Thread
 
I would like to say a big thanks to Chris (high vacuum house) for delivering the Murphy, a true gentleman, Mick.

Chris55000 5th Jul 2020 11:39 am

Re: The Thanks Thread
 
Hi!

My grateful thanks to Dave McMahon & Steve for taking the trouble to send me CD1400 Pictures and the CX1571 pages, plus all the RIAA Preamplifier design and theory information!

I am using the CD1400 information provided by Dave to make a new "Early Versions" Supplement Booklet that will be uploaded when completed – I've begun work on revised circuit diagrams to cover the differences found by Dave, compared to the standard units!

Chris Williams

DMcMahon 5th Jul 2020 10:56 pm

Re: The Thanks Thread
 
Many thanks to Terry123 for the Grundig Technical Information Bulletins, lots of interesting reading.

David

Syrinx1 7th Jul 2020 1:45 pm

Re: The Thanks Thread
 
Hi,

I just wanted to say thanks to Ed Dinning. He collected and dropped off some stuff from me yesterday, and had chance to have a chat in person. Generous, helpful and interesting chap who I think embodies the spirit of this forum!

Thanks Ed.

Ed_Dinning 8th Jul 2020 3:59 pm

Re: The Thanks Thread
 
My thanks to Syrinx, Woodchops and Andiit for retaining stuff for me during the lockdown.
Quite a long trip on Mon, but met some nice people and well worth it

Ed

frankmcvey 11th Jul 2020 2:33 pm

Re: The Thanks Thread
 
Thanks to all participating in this thread, the disposal of assorted redundant kit from "Woodchips". Although Bob had given us the stuff FOC, I decided to request a small charity donation for each item to ensure that those bidding genuinely wanted/needed the stuff.

Thanks to your generosity (and Bob's!), the Salvation Army is now better off to the tune of £47.00.

https://imagizer.imageshack.com/v2/6...924/EPOuWv.jpg

https://imagizer.imageshack.com/v2/6...923/axidqe.jpg

Cheers,

Frank

Nickthedentist 13th Jul 2020 11:21 am

Re: The Thanks Thread
 
Many thanks to John C. (John M0GLN) for digging out and photographing a very useful (and hard to find) exploded diagram of the UA15 autochanger. And within hours of my asking too :)

Nick.

electronicskip 13th Jul 2020 3:09 pm

Re: The Thanks Thread
 
Thanks to Geoff_555 for the video equipment, had lots of entertaining hours bringing them back to full health.
Thank you.

Reelman 13th Jul 2020 7:26 pm

Re: The Thanks Thread
 
Many thanks Terry (Terry123) for the Grundig Technical Information Bulletins, they have information not available anywhere else.
Cheers!
Peter

Electronpusher0 15th Jul 2020 6:06 pm

Re: The Thanks Thread
 
Thanks to David Simpson for the very generous gift of two valve base panels and metal case for my curve tracer.

Peter

cathoderay57 20th Jul 2020 9:20 pm

Re: The Thanks Thread
 
Big thank you to mole42uk for the Heathkit RF1-U sig gen. Works a treat! Cheers, Jerry

paulsherwin 23rd Jul 2020 5:27 pm

Re: The Thanks Thread
 
Thanks to Martyn (Icttutor) for the 3G WiFi router and graphics card.

DMcMahon 24th Jul 2020 4:37 pm

Re: The Thanks Thread
 
Thanks to HurtyAC for supplying the two Tektronix 2235 scope manuals.

David

DMcMahon 24th Jul 2020 4:42 pm

Re: The Thanks Thread
 
Thanks to Gus (westcliffe) for suppling Farnell E30/2 power supply, it will come in very handy.

David

eddie_ce 27th Jul 2020 4:51 pm

Re: The Thanks Thread
 
Many thanks to Bill (AC/HL) for sending me two original Mullard diodes FOC, just the job.

Also Bill did not want to be reimbursed for the cost of postage, so according to his wishes I have made a small donation to our local water rescue charity.


All times are GMT +1. The time now is 8:28 pm.

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.