Re: The Thanks Thread
 

Another big thank you to ValvoStef, this time for a nice big box of various components that will keep me busy for a while.

Thank you, Stef.


Nigel

Re: The Thanks Thread
 

A thanks to Radio Wrangler for the toroids and transistors

Re: The Thanks Thread
 

A big thank you to Jim (jimbilton) for the Sony radio/cassette just received. Would not even accept Postage for it. Something I’ve been looking for for a long time.
Thanks again,
Peter

Re: The Thanks Thread
 

A big thank you to Peter (Electronpusher0) for the rectifiers. Would not even accept Postage for them. Another perfect example of the generosity of forum members.
Thanks again,
Peter

Re: The Thanks Thread
 

Thankyou to Diabolical Artificer (Andy) for supplying the 4 old type phono connectors, just what I needed.

David

Re: The Thanks Thread
 

Just to say thank you to Davidh 1041 for sending me a load of tag strips , at no cost to me ,Mick.

Re: The Thanks Thread
 

Many thanks to jimbilton for some splendid packaging and a rather nice AT6 too!

Re: The Thanks Thread
 

Many thanks to Mick (vinrads) for sending me a perfect knob for my Advance H1E FOC. A gentleman!

Re: The Thanks Thread
 

Huge thanks to Bill (batterymaker1) for sending me details and graphics for a Pertrix 78 battery which I intend to make for my newly acquired Philips Annette.

Re: The Thanks Thread
 

Thanks to Andrew (AndiiT) for the tape heads which look great

Re: The Thanks Thread
 

Thank you to Steve G4WCS for the BM8/2 Meggar, it has come in very useful.

David

Re: The Thanks Thread
 

Thanks to frankmcvey for the connector speedy service cheers .

Re: The Thanks Thread
 

Many thanks to buggies (George) for supply of HV diodes for Solartron scope.

David

Re: The Thanks Thread
 

Many thanks to terrybull for sending an interesting excerpt from a book dealing with the introduction of radar and for the speed in which he did so.

Smiths Sectric Clock
 

Big thanks to Mike Phelan for fixing our Smiths Sectric Clock. It’s back on the wall and still running fine.

Also thanks to Mike Barker for fixing the coil.

Re: The Thanks Thread
 

I would like to say a big thanks to Chris (high vacuum house) for delivering the Murphy, a true gentleman, Mick.

Re: The Thanks Thread
 

Hi!

My grateful thanks to Dave McMahon & Steve for taking the trouble to send me CD1400 Pictures and the CX1571 pages, plus all the RIAA Preamplifier design and theory information!

I am using the CD1400 information provided by Dave to make a new "Early Versions" Supplement Booklet that will be uploaded when completed – I've begun work on revised circuit diagrams to cover the differences found by Dave, compared to the standard units!

Chris Williams

Re: The Thanks Thread
 

Many thanks to Terry123 for the Grundig Technical Information Bulletins, lots of interesting reading.

David

Re: The Thanks Thread
 

Hi,

I just wanted to say thanks to Ed Dinning. He collected and dropped off some stuff from me yesterday, and had chance to have a chat in person. Generous, helpful and interesting chap who I think embodies the spirit of this forum!

Thanks Ed.

Re: The Thanks Thread
 

My thanks to Syrinx, Woodchops and Andiit for retaining stuff for me during the lockdown.
Quite a long trip on Mon, but met some nice people and well worth it

Ed

Re: The Thanks Thread
 

Thanks to all participating in this thread, the disposal of assorted redundant kit from "Woodchips". Although Bob had given us the stuff FOC, I decided to request a small charity donation for each item to ensure that those bidding genuinely wanted/needed the stuff.

Thanks to your generosity (and Bob's!), the Salvation Army is now better off to the tune of £47.00.

https://imagizer.imageshack.com/v2/6...924/EPOuWv.jpg

https://imagizer.imageshack.com/v2/6...923/axidqe.jpg

Cheers,

Frank

Re: The Thanks Thread
 

Many thanks to John C. (John M0GLN) for digging out and photographing a very useful (and hard to find) exploded diagram of the UA15 autochanger. And within hours of my asking too :)

Nick.

Re: The Thanks Thread
 

Thanks to Geoff_555 for the video equipment, had lots of entertaining hours bringing them back to full health.
Thank you.

Re: The Thanks Thread
 

Many thanks Terry (Terry123) for the Grundig Technical Information Bulletins, they have information not available anywhere else.
Cheers!
Peter

Re: The Thanks Thread
 

Thanks to David Simpson for the very generous gift of two valve base panels and metal case for my curve tracer.

Peter

Re: The Thanks Thread
 

Big thank you to mole42uk for the Heathkit RF1-U sig gen. Works a treat! Cheers, Jerry

Re: The Thanks Thread
 

Thanks to Martyn (Icttutor) for the 3G WiFi router and graphics card.

Re: The Thanks Thread
 

Thanks to HurtyAC for supplying the two Tektronix 2235 scope manuals.

David

Re: The Thanks Thread
 

Thanks to Gus (westcliffe) for suppling Farnell E30/2 power supply, it will come in very handy.

David

Re: The Thanks Thread
 

Many thanks to Bill (AC/HL) for sending me two original Mullard diodes FOC, just the job.

Also Bill did not want to be reimbursed for the cost of postage, so according to his wishes I have made a small donation to our local water rescue charity.

Re: The Thanks Thread
 

Many thanks to Kevin Hoyland and jonmiller for their recent purchases of surplus equipment and to Radio Wrangler for transport services. The BVWTM has now received £60.00 from the sale proceeds.

Peter

Re: The Thanks Thread
 

Hello.
I would like to say A Big Thank You to two outstanding People,
Peter Scott and David Radio Wrangler .

Regards
Kevin

Re: The Thanks Thread
 

Hello,

a big Thank You Very Much to Richard Mole42UK for sending me his Leak Stereo Receiver. It did not take long and I was happy to receive it today safe and sound! Richard, thanks once more for packing it so well!

Kindest Regards, Joe

Re: The Thanks Thread
 

Thanks to Terrybull for the phone. I might have a go at replacing the screen.

Re: The Thanks Thread
 

Thanks for that Mikey66

Re: The Thanks Thread
 

Thanks very much to Andy (Diabolical Artificer) for the valves and sockets, and his hospitality and his ideas and insight during our chat. What a nice quiet part of the country he lives.

Was also nice to meet Wendy and resolve the transportation request

It has always been a pleasure to meet people of this forum.

Chris

Re: The Thanks Thread
 

Thank you to Proton 21 for the valves very kindly offered foc.

Regards,

David

Re: The Thanks Thread
 

Thanks to David (Captain Pugwash) for his generous donation in respect of the Store 4 which thankfully made it (via DPD) in one piece. And thanks to the mods and members generally for supporting charity fund-raising on the forum.

Re: The Thanks Thread
 

I would very much like to thank Brunell for the Makita cordless drill he so kindly gave me. With a re built battery pack it has many many years ahead of it:)

Steve.

Re: The Thanks Thread
 

I am eternally grateful to ParcGwyn for the contribution of an SC/MP microprocessor chip for my latest project. For the first time in 35 years I have a real SC/MP NBIL computer, I have a test bench for code which up until now has only been tested under emulation conditions. More immediately, I was able to test a solution to a 44 year old problem!

Despite these ICs attracting real money in another place, ParGwyn flatly refused to accept payment. The forum spirit at its best!

Re: The Thanks Thread
 

Thanks to David (Backtoreality) for giving me a Cossor 501 case are wrapping it so expertly that I think it would have arrived in one piece, even via Beirut. Thanks for all that time and trouble.
Mark

Re: The Thanks Thread
 

Another message of thanks for ParcGwyn for the Eprom programmer and PC which he kindly dropped at my daughters allowing me the convenience of collecting at my lesuire (which I did yesterday) many many thanks, a true gentleman

Re: The Thanks Thread
 

Many thanks to forum member 'Garysnooker' for a copy of the original Richard Allen Amp Manual, much appreciated.

Regards,
Alan

Re: The Thanks Thread
 

Many thanks to vidjoman for supplying a few convergence pots for the 2k, they will be most useful.
Greg.

And also herald1360 for the power transistors, also for the 2k.

Re: The Thanks Thread
 

Many thanks to qualityten (David) for supply of FOC BM100/2 Megger.

David

Re: The Thanks Thread
 

A thanks to forum member dave_n_t who has helped me out with some new IF/RF Coil 'slugs'.

A pleasure to 'chat' with you dave.
Many thanks for your help.

James.

Re: The Thanks Thread
 

A big thanks to Woodchips for the most excellent Tek current probe. It works perfectly (after fixing a loose connection in the power supply to the 134) - see attached, upper trace is cal voltage waveform, lower is current probe waveform, spot on at 30mA!

Re: The Thanks Thread
 

Many thanks to David, Radio Wangler for the transistors just received. Totally unprompted, he had seen a post of mine expressing interest in a project and sent the transistors to help me out at no cost to myself.
David is a backbone of this forum for many reasons and I am very grateful.
Peter

Re: The Thanks Thread
 

A big thank you to terry123 for providing various Simon Minstrelle documentation, will come in very useful.

David

Re: The Thanks Thread
 

A big thank you to David/qualityten for sending me loads of cd's and dvd's some lovely stuff there , foc , Mick.