Ten Tec 6-2M transverter
4 Attachment(s)
Managed to pick up this transverter. Built from a kit.
On the whole it seems well designed, uses a discrete mixer and pin diode switching. It looks to have had a final transistor replaced and a couple of addintional leds cobbled On. Plenty ferrites in there. Need a suitably vintage prime mover now. Happy days |
Re: Ten Tec 6-2M transverter
If those PA transistors ever need replacing you will have a hard job Steve.
What has been out there for last 10 years are almost all 100% fakes. Hope yours are good. |
Re: Ten Tec 6-2M transverter
Tested and working. Input attenuator resistors are set for 5 watts so its putting 6 watts out on 50 with 1 watt input from the IC-260
https://youtu.be/aUchWYqVcb4 https://youtu.be/ELzPJ0y_EBg |
All times are GMT +1. The time now is 9:29 pm. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.