Kenwood TS130S
Hi everyone.
A mate of mine has a Kenwood TS130S. He has his foundation licience and wants to use the rig. Is there a way of turning down the rig to 10w output as at the moment it's doing around 100w. I did have a look in the service manual and thought of turning down the finals board. I know some people will say adjust RF Gain. But thats not good enough. What are peoples thoughts. Is there a mod to turn it down. Thanks Andy G6OHM |
Re: Kenwood TS130S
is it for ssb, fm , am or all?
|
Re: Kenwood TS130S
Most of the basic level models from Japan were also available as 10W models. They had different PA boards.
You could try to find a board, but it likely comes with a full radio. The easiest option might be a licence upgrade :-) Not said to be cute, but in terms of total effort. David |
Re: Kenwood TS130S
TS130V would be the thing to find
|
All times are GMT +1. The time now is 1:04 pm. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.