UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Sets, Parts and Service Information Offered (private sellers only, exact price required, no swaps) (https://www.vintage-radio.net/forum/forumdisplay.php?f=27)
-   -   Magnetic shields - for CRT & transformer (https://www.vintage-radio.net/forum/showthread.php?t=146585)

GroovyG 16th May 2018 3:02 pm

Magnetic shields - for CRT & transformer
 
1 Attachment(s)
Following up a suggestion on another thread here that mag shields could have some further use, perhaps there might be some interest in some parts I've had for many years. As in photo:
1) a two-part shield for CRT, cylindrical part 72mm (2 7/8") diam x 161 (6 3/8"), opening to ~121 (4 13/16") at 89mm axially.
2) Cylindrical 70mm diam x 163 (2 3/4 x 6 7/16") both halves marked 10AB/720
3) Memory claims this was around a transformer in an ancient TV: aperture 75 x 106 (3 x 4 3/16") x 111 (4 3/8") long.
All FOC.


All times are GMT +1. The time now is 9:45 pm.

Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.