UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Repair and Restoration Services Wanted (https://www.vintage-radio.net/forum/forumdisplay.php?f=145)
-   -   PCB circuit board layout needed (https://www.vintage-radio.net/forum/showthread.php?t=160359)

Nymrod121 7th Oct 2019 3:14 pm

PCB circuit board layout needed
 
I'd appreciate help from anyone with good working knowledge of EZ-PC to design a single-sided layout imvolving 3 16-pin CMOS ICs, a handful of capacitors/resistors/diodes. The circuit itself is proven (Veroboard prototype) but the end use involves mobile deployment for demonstration purposes and V/B is not considered robust enough to cope with the rigours of transit ... and it looks like a rat's nest anyway.

Unfortunately a previous and willing volunteer (not on this Forum) had offered to help but is currently unable to complete due personal circumstances. The timescal was end of May and I've simply no time to available to learn EZ-PC (or any other program, free or otherwise). If anyone is of a mind to consider my request, please pm me with your preferred email address and we can take it from there.

For the avoidance of doubt ... I don't expect it to be done for free :)

Thanks for your time taken in consideration,

Best wishes
Guy

gingpeakin 7th Oct 2019 4:36 pm

Re: PCB circuit board layout needed
 
PM sent

Ging

Nymrod121 16th Oct 2019 5:44 pm

Re: PCB circuit board layout needed
 
This project is moving forward apace :) I'll advise the outcome via 'Success stories' thread in due course.
Many thanks to all those who have so kindly responded re. help/suggestions.
Guy

(mods, please close - thanks)


All times are GMT +1. The time now is 11:59 pm.

Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.