How's this for a strange device
2 Attachment(s)
Found this in a drawer today when looking for a new laser. had it ages it came in a load of stuff from an old ships radio technician and Ham radio guy at least 20 years ago when I had a shop he thought I would find it useful
I wonder how accurate it would be never mind it qualities as a spark transmitter :o |
Re: How's this for a strange device
I've not met one in the flesh, but seeing the name reminded me that the device was regularly advertised in Practical Television at one time as the "Radar Kilovolter": produced, according to the Science Museum online, from 1950 to 1974.
Paul |
Re: How's this for a strange device
The mark 2 may have an extended range to cope with colour EHT levels.My father had one,earlier model the transparent case always looked to me as if it was made from celluloid!Les.
|
Re: How's this for a strange device
Quote:
https://collection.sciencemuseumgrou...eter-voltmeter |
Re: How's this for a strange device
It reminds me of the old Flashtest devices used for car EHT testing, but considerably more elegant in build than the flashtest which was a piece of plastic with opening like dividers, and a small piece of metal either side to see how far the EHT spark would flow.
|
Re: How's this for a strange device
Quote:
In a previous life I used kilovolt (and indeed megavolt) spark gaps in the high-power laser equipment I worked with. Some of the gaps were DC-charged, as this one would be, but most were pulse-charged. Counter-intuitively perhaps, the pulse-charged ones were a good deal more reliable than the DC-charged ones (but whenever we possibly could, we tried to trigger all of them). Things which can cause DC-charged gaps to 'go early' include: changes in air pressure and humidity, contamination and damage (even at very small scale) on the electrode surfaces, surface tracking on the gap's insulator (it makes UV light which photoionises the gas in the gap), cosmic rays (gas breakdown is used in the 'spark chamber' detector e.g. https://www.youtube.com/watch?v=nvvW9chTxH4) etc, etc. Cheers, GJ |
Re: How's this for a strange device
1 Attachment(s)
Many years back I acquired one of those Kilovolter devices, but to be honest I never had the courage to put it anywhere near the EHT of a television set, though I still have it somewhere.
I later acquired the KHP-30 EHT probe pictured below, with which I felt far more comfortable. |
Re: How's this for a strange device
I have a Radar Kilovolter too, I thought I started a thread about it some time ago. And I've never tried it on a TV EHT supply, not for my own safety but because all the units I work on (video monitors) have transistorised line output stages and drawing a spark from the EHT is not a good idea.
For measuring EHT I have the Heathkit EHT meter (one of only 2 Heathkits I've ever assembled).It's just a high-voltage 800M resistor and a 50uA meter in series, and thus reads to 40kV. I don't know how accurate it is, but most of the time I just want to check that EHT is present and roughly right (right enough that I should have something on the screen) |
Re: How's this for a strange device
Wise decision. Solid state TVs rendered this a museum curiosity.
|
Re: How's this for a strange device
Yes I have one of these EHT testers too and likewise, never tried it! Think mine is the original one , not MK11.
|
Re: How's this for a strange device
Celluloid must have properties that made it suitable then..? (i recall it was a component of ad-hoc incendiary bombs!- but not the ignition source as such)
Dave |
Re: How's this for a strange device
Hi,
Back in around 1972 I worked in a radio & TV repair business. My boss had one of those and tried to check the EHT on a Bush transistorised TV set. He was only ever used to valve tellies and, when it arced over, it wrote off the time bases, the sound board and probably the IF strip too. Oops! This happened in the customer's house, and he sheepishly muttered: "It needs to go back to the workshop. Have a loan set." Cheers, Pete. |
Re: How's this for a strange device
As this thread has progressed, I have become increasingly glad that I never used mine. It seems it was of as dubious utility as I feared. As I recall, I only bought it out of curiosity in the first place during my early tentative forays into eBay.
|
Re: How's this for a strange device
I had one when I was in my teens, and used it, once. No ill effects but only used for the amusement factor (!). I remember persuading my friends that once a spark had been enacted it was then stored in the device for use on - well, them! It's long since gone.
|
Re: How's this for a strange device
So this was a serious bit of kit and not a cheap K tel style tester you would get out the Sunday papers ad's. I too have never plucked up the courage to use it. Lucky really as by the time I entered the trade it was all transistor sets.
Think I will stick it back in it's drawer and let it rest for another 20 years :) |
Re: How's this for a strange device
I am pretty sure it's mentioned in 'Television Receiver Servicing' by Spreadbury which I have always considered to be a 'serious' book.
|
Re: How's this for a strange device
Brings back lots of memories we had one in the workshop were I started
back in the late 1950's. It was kept I a thick cardboard box and only used by S/ Manger only . Just valve tv.s in those day's Regards Derrick |
All times are GMT +1. The time now is 12:18 am. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.