Industrial Tool and Die Works model 6000-A radio schematic
Hello All
I wonder if anyone has a readable scan of the schematic for the model 6000-A radio, a US-produced ‘morale’ radio produced by the Industrial Tool and Die Works in Minneapolis towards the end of the war? I’ve found an indistinct scan which is all but unreadable, but a better one would be very useful to me. The schematic, along with a station log, was housed in the lid of the radio, but it’s missing from mine. There’s a description of the model 6000-BAC, which seems to be a later version of the radio, incorporating mains and battery switching at: https://people.ohio.edu/postr/bapix/6000-BAC.htm And a readable schematic of this model can be found on the www, but I can’t find one for the 6000-A. Many thanks for any help you can give me. Best regards … Stef |
Re: Industrial Tool and Die Works model 6000-A radio schematic
I repaired an A some years ago for someone but couldn’t find a circuit diagram then. I did however keep 3 photos of the set which I will pass to you if they would be any help. If you would like them please forward an email address by PM so that I can send better quality pictures.
Jim |
Re: Industrial Tool and Die Works model 6000-A radio schematic
1 Attachment(s)
Larger pictures to Stef and 3 Pictures here in case anyone else recognises the receiver.
Jim |
All times are GMT +1. The time now is 11:24 pm. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.