UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Forum Announcements and Comments (https://www.vintage-radio.net/forum/forumdisplay.php?f=18)
-   -   The Thanks Thread (https://www.vintage-radio.net/forum/showthread.php?t=60832)

bobbyball 7th Oct 2013 10:47 pm

Re: The Thanks thread.
 
Thanks to two Forum members -"cmjones01" - for the Barco CRT monitor, and especially to "dodgy-dxer" for collecting it for me from cmjones01, holding on to it for a bit, and meeting me away from his own home due to local roadworks to deliver it to me!

There are some "nice guys" left!

Miguel Lopez 9th Oct 2013 7:43 pm

Re: The Thanks thread.
 
I have received a parcel with plenty of components: resistors, caps, transistors, diodes, LEDs, etc. This parcel was stopped in Spain for more than a year due to unlucky circumstances but it is finally in my hands. I want to thank all the folks who helped to collect all this components to be sent to me. I won't mention names to avoid the risk to forget any.

To all of you: Thank you very much :thumbsup:

Philips210 10th Oct 2013 9:10 pm

Re: The Thanks thread.
 
Many thanks to forum member dave_n_t (Dave Teague) for kindly sending me some excellent BVWS magazines.

Regards
Symon.

Phil G4SPZ 11th Oct 2013 12:09 am

Re: The Thanks thread.
 
Thanks to Steve (Colourstar) for the dance band LPs, plus the free HMV fan heater and BSR deck! :wave:

glowinganode 13th Oct 2013 11:48 am

Re: The Thanks thread.
 
Thanks Chris (Herald1360) for the dish washer.
Mrs. Anode is suitably excited.
Cheers, Rob.

paulsherwin 13th Oct 2013 12:43 pm

Re: The Thanks thread.
 
Thanks to Ken (Ambientnoise) for his BT Business Hub router which I've been having great fun investigating. He even paid the postage! Top man.

Paul Stenning 19th Oct 2013 4:07 pm

Re: The Thanks thread.
 
Email received:

Quote:

Dear Paul

I came to your site because I was looking for a solution for my VCR. The
mains supply VEK 5325 (video recorder Blaupunkt RTV 915 / Panasonic).
The good tip with the:
"You need to change the start-up cap, C9, which IS 1uF 400V you will see it
adjacent to R3" was absolutely true.

Here I would say everyone in the Forum a thank you for this help. The
recorder is working again.

With regards
frederikus

Mikey66 21st Oct 2013 11:51 am

Re: The Thanks thread.
 
Thanks to Andy (setsappeal) for the 1978 - 79 red book.

Anthony Thomas 21st Oct 2013 8:26 pm

Re: The Thanks thread.
 
Thanks to Ed Dinning for the coil formers that arrived today.

Tony

Anthony Thomas 21st Oct 2013 8:29 pm

Re: The Thanks thread.
 
A slightly belated thanks to Martin Crossley for the circuit board for the Sussex Valve Tester project that I have started collecting parts for.

Tony

Stuart R 23rd Oct 2013 7:13 pm

Re: The Thanks thread.
 
Big Thanks to John (60 oldjohn) for sending over a ferrite rod for my Bush VHF90 project. All arrived safely and in one piece due to a great bit of packing!

SR

YoungManGW 31st Oct 2013 4:52 pm

Re: The Thanks thread.
 
Many thanks to a Chris (crusher19860138) for the AW70 and for kindly including spare side-mount valves - much appreciated.

HamishBoxer 4th Nov 2013 2:11 pm

Re: The Thanks thread.
 
Thank You Bob (WOODCHIPS) for the Bulgins that are here today. Very grateful.

David

Damo666 5th Nov 2013 5:21 pm

Re: The Thanks thread.
 
A big thanks to Kernowcam who sent me the Motorola P210 as a result of my "Old PMR gear wanted" in the Wanted sub-forum.

Cheers, Ian. :beer:

MarkAT6 8th Nov 2013 11:37 am

Re: The Thanks thread.
 
many thanks to Alanomt for sending me (FOC) the Studio O Cartridge with all important stylus retaining screw!

Phil G4SPZ 8th Nov 2013 2:14 pm

Re: The Thanks thread.
 
A really big thank-you to Andy (Dr Wobble) for the old oil lamp, which I've now restored. It's brilliant (literally...) Cheers! :wave:

ukcol 11th Nov 2013 1:04 pm

Re: The Thanks thread.
 
Thanks to G6Tanuki, Paul Stenning, David, Nick, Alvin, Paul Sherwin and Mike who all helped me with knowledge and advice when I got in a mess with a 32Gb SDHC card.

YoungManGW 11th Nov 2013 6:29 pm

Re: The Thanks thread.
 
Many thanks to Robert Darwent and HamishBoxer for their kind assistance in checking out an Ekco A22 for me. Much appreciated. Regards.

GrimJosef 14th Nov 2013 7:06 pm

Re: The Thanks thread.
 
A big thank you to Chris (Herald1360) for the Leak Delta 70. I plan to repair it alongside one I already have and use each as a check for the operation of the other. Thanks also for showing me the GEC KT88 amps (I am now just a bit green with envy though ...).

Cheers,

GJ

Herald1360 15th Nov 2013 1:33 am

Re: The Thanks thread.
 
Nice to meet you, GJ! Mrs Herald reckoned those choccies were worth far more than any old electrical tat ;D


All times are GMT +1. The time now is 7:45 am.

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.