UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Television Standards Converters, Modulators etc (https://www.vintage-radio.net/forum/forumdisplay.php?f=95)
-   -   Power requirement for Domino standards converter (https://www.vintage-radio.net/forum/showthread.php?t=137245)

Dave Moll 8th Jun 2017 2:43 pm

Power requirement for Domino standards converter
 
I have been having a bit of a tidy-up behind my main (modern) television, and one of the items there that has not been used recently is my Domino 625 to 405 standards converter (now-obsolete predecessor of the Aurora for those unfamiliar with it). In fact, it has become separated from its power supply, and I can't remember what voltage it needs. I suspect it's either 9V or 12V, as there was one of each also there.

I can't seem to find any mention of this particular specification on the web, so I wonder whether there is anyone here who can recall what it required, so that I can get it going again. Thanks.

murphymad 8th Jun 2017 3:07 pm

Re: Power requirement for Domino standards converter
 
12 volts at 1 amp is what I use.

Mike...

Dave Moll 8th Jun 2017 4:19 pm

Re: Power requirement for Domino standards converter
 
Thanks, Mike. I think I now know which wall wart (albeit rated at 500mA) belongs to the Domino. A couple of sticky labels will be attached to said wall warts to prevent a recurrence of this problem!

Moderators: this thread has now served its purpose.


All times are GMT +1. The time now is 3:53 pm.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.