UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Vintage Test Gear and Workshop Equipment (https://www.vintage-radio.net/forum/forumdisplay.php?f=36)
-   -   Marconi 995A/5 Sig Gen Modulation Interference (https://www.vintage-radio.net/forum/showthread.php?t=143942)

David Simpson 14th Feb 2018 6:54 pm

Marconi 995A/5 Sig Gen Modulation Interference
 
Just wondering - are there any 995A/5 buffs out there who have experienced AM modulation remaining when FM is selected on S1. I.e. 50% AM modulation (meter fsd) set, but approx. 25% remains when set to Int. FM when scoping 20MHz 100mV o/p profile. Note, modulation meter(Racal Dana 9009A) had given correct AM & FM settings of 50% AM, & 5Kc/s & 15 Kc/s Dev.

Regards, David


All times are GMT +1. The time now is 6:24 pm.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.