UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Vintage Test Gear and Workshop Equipment (https://www.vintage-radio.net/forum/forumdisplay.php?f=36)
-   -   Display shimmering at edges ( PM3375 Philips ) (https://www.vintage-radio.net/forum/showthread.php?t=148110)

Oldgeorge 14th Jul 2018 12:16 pm

Display shimmering at edges ( PM3375 Philips )
 
1 Attachment(s)
I am having an issue with my PM3375 scope.
The problem is that the trace in the centre section of the CRT is fine but towards the outside edges it sort of shimmies very quickly from side to side.
Its the same in all modes including digital freeze mode.
The menu text in digital mode is ok in the centre but " raggy" at the ends.
All controls work normally.
The effect is on all timebase speeds.

MrBungle 14th Jul 2018 12:45 pm

Re: Display shimmering at edges ( PM3375 Philips )
 
This might be early signs of power supply problems. It’s about the right age to need a refurb. I’d check the power supply rails for noise.

Oldgeorge 14th Jul 2018 7:09 pm

Re: Display shimmering at edges ( PM3375 Philips )
 
Yes thats what I was thinking, need to get hold of a diagram, but hen's teeth would be easier to acquire

I do have other scopes so checking won't be a problem.

karesz* 15th Jul 2018 12:57 am

Re: Display shimmering at edges ( PM3375 Philips )
 
Hello,
you can download it_after some waiting...
rgds, Karl


All times are GMT +1. The time now is 11:25 am.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.