Header ID please
1 Attachment(s)
Can some put a name to this header please? The 15 pins are approximately 2.4mm apart, the overall length is 40mm and 3.8mm wide
many thanks |
Re: Header ID please
I found Maplin do a strip of header pins of 2.54mm spacing, so that'll have to do, the cable block can be secured in with hot glue, hopefully
|
All times are GMT +1. The time now is 1:57 am. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.