UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Forum Announcements and Comments (https://www.vintage-radio.net/forum/forumdisplay.php?f=18)
-   -   The Thanks Thread (https://www.vintage-radio.net/forum/showthread.php?t=60832)

greg_simons 16th Jun 2023 2:21 pm

Re: The Thanks Thread
 
Many thanks to AC/HL for the DY86, one more fault eliminated on this little tv.
Greg.

Chris55000 19th Jun 2023 12:30 pm

Re: The Thanks Thread
 
My very grateful thanks to Member WaveyDipole who very generously donated me three Tektronix 468 PCB assemblies to help me repair the '468 I imported from America that turned out to have a fatal self–test failure, caused by an internal short–circuit within the original TRW1007PC Video DAC dragging the +5 V to about 4.1 V, resulting in failure!

I have fitted the replacement Graphics panel and the supply line is now OK – there are still other analogue faults to look at, but I've got a carcass with a spare A15 Interface Board for these!

You are a Star, Sir!

Chris Williams

turretslug 19th Jun 2023 8:21 pm

Re: The Thanks Thread
 
Thanks to Rob "whiskas" for a very well-protected package of useful vintage parts- there are some commercial operators who could take worthwhile lessons from him on how to package and protect posted items properly!

Colin

G6ONEDave 20th Jun 2023 3:31 pm

Re: The Thanks Thread
 
Just a belated thanks to Cifer1887 for supplying me with the Fakerscope 3000 user guide.

Brilliant!

Dave

Syrinx1 22nd Jun 2023 3:01 pm

Re: The Thanks Thread
 
Thanks to ChrisKT for the DRAM. It's enabled me to successfully repair memory faults on a couple of my beebs!
Thanks

vinrads 24th Jun 2023 11:35 am

Re: The Thanks Thread
 
Just to say a big thanks to Terry (valvepower) for sending me the switches at no cost to me , Mick.

Chris55000 29th Jun 2023 10:08 pm

Re: The Thanks Thread
 
A big thank you to Member Jac from the Netherlands who scanned me the Philips PM3055 Oscilloscope PCB layout drawings with the pink and grey tracking tints – none of the available online or paper ones I can find show these and the scans were absolutely pristine and pin–sharp!

Chris Williams

Cobaltblue 29th Jun 2023 10:12 pm

Re: The Thanks Thread
 
A big thank you to Glyn for the Z80 processors, Just need to darg my Nascoms out of storage :thumbsup:

So many projects so little time :(

Cheers

Mike T

Robsradio 2nd Jul 2023 5:25 pm

Re: The Thanks Thread
 
Thank you to Half a Mullard (Howard) for sending me a Micro Cassette in response to my wanted advert.
Much appreciated
Rob

vinrads 3rd Jul 2023 8:56 am

Re: The Thanks Thread
 
A big thanks to David aka captainpugwash for sending me a load of eight track tapes at no cost. Mick.

SiriusHardware 3rd Jul 2023 12:25 pm

Re: The Thanks Thread
 
My thanks to Wendymott for kindly sending up the Z80 PCB, very well packed and protected too, it made it here in perfect condtion.

electronicskip 4th Jul 2023 6:21 pm

Re: The Thanks Thread
 
Big thanks to G6Tanuki for the Pye Control head.
Very well packaged,
Excellent!

Reelman 11th Jul 2023 4:20 pm

Re: The Thanks Thread
 
Many thanks to Nickthedentist for the lovely Monacor grilles and electronic “transformers”. The grilles will make a big improvement to my inside wall loudspeakers. Great packaging as well. Thank-you Nick!

Peter

HamishBoxer 12th Jul 2023 9:38 pm

Re: The Thanks Thread
 
Many Thanks to Gordon (DRYJOINT) for the Roberts R707, fast , safe , arrival.

David

thermionic 15th Jul 2023 9:05 am

Re: The Thanks Thread
 
Thank you Craig Sawyers for offering and carefully packing an aluminium side panel for my ‘Startronic’ DC Power Supply.

I acquired this useful PSU many years ago, minus said panel. Now, finally it’s complete.


SimonT.

DMcMahon 15th Jul 2023 3:42 pm

Re: The Thanks Thread
 
Thank you to Scott (ScottBouch) for the 250mA 20mm glass fuses that safely arrived today.

David

yampy187 15th Jul 2023 9:07 pm

Re: The Thanks Thread
 
Thank you to Dave (Dazzlevision) for the 3500 convergence panel!

It works a treat!

Cheers.

Jan

yampy187 18th Jul 2023 10:15 am

Re: The Thanks Thread
 
Thank you to Graham (SunSPARK) For the AYR Teletext decoders.

They work Great!

Cheers.

Jan

Nickthedentist 18th Jul 2023 12:28 pm

Re: The Thanks Thread
 
Thanks to Andy (Yestertech/Setsappeal) for the big box of pots, which arrived safely last week.

fetteler 24th Jul 2023 10:48 pm

Re: The Thanks Thread
 
I would like to thank Aaron (Aaron_555) very much indeed for his kind gift of a Philips CD104. I will coax it back to life - it's going to be fantastic to have a 104 to play CD's on again after all these years. We will treasure it.

Best wishes,

Steve.


All times are GMT +1. The time now is 10:17 am.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.