Straightening Variable capacitor vanes
Hi There,
Being in the position of having dropped a variable capacitor and bent the frame I had the job of straightening up the vanes on the rotor. Fortunately AOL came to my rescue, or one of their Cd's did! I found that the cd with the circular ridge towards the centre filed off was the exact thickness to fit snugly between the vanes, I cut out a 90 degree section of the disc using a sharp pair of scissors and it made straightening the vanes up much easier. Regards to all Amanda |
All times are GMT +1. The time now is 1:12 pm. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.