Re: The Thanks Thread
 

A big thank you to Simon (thermionic) for the radios.

Re: The Thanks Thread
 

My thanks to Pamphonica (Jeremy) for the Hatfield 6-decade resistance box. As Jeremy mentioned, all the switches were indeed very stiff to rotate: all of those have been replaced. All the Rs. are 'on-spec.' as far as I can measure; every R is stated as 0.1% tolerance.
Overall, a very useful piece of kit for use as a calibration standard.

Al. / Nov. 20th.

Re: The Thanks Thread
 

I'd like to say "Thank You" to Frank (frankmcvey) for sending me a back for a Colvern wirewound pot I am repairing. Very kind and thoughtful of you Frank and much appreciated.

Steve.

Re: The Thanks Thread
 

Many thanks to Regentone001 for the two tape recorders. One has already provided the head cover to replace the damaged one I bought at Golborne.
Also was great to see the Avengers on 405 lines again, must be nearly 50 years ago since the last time! Good to hear the Regentone ‘gram as well.
cheers,
Peter

Re: The Thanks Thread
 

Thanks to Camtechman (Tony) For doing a super repair on a Bush VTR 103 Aerial , for the price of postage only , great job , Thanks.

Re: The Thanks Thread
 

My thanks to Alistair D. for sending to me a copy of the manual for the Levell TM3 µ-voltmeter. And on that subject, my thanks also to Kalee20 for sending to me that very item.

Al. / Skywave / Nov.24th.

Re: The Thanks Thread
 

My thanks to Les (Tower Radio ) for the cards for my HSVT thanks again Chris .

Re: The Thanks Thread
 

Thanks to Emeritus for sending me some Teflon covered wire FOC!

Re: The Thanks Thread
 

My sincere thanks to David G4EBT who took a detour of a good few miles to drop me some magazines. Thank you David. Good to meet you.

Re: The Thanks Thread
 

Huge thank you to Graham, one of the moderators for kindly sourcing me a 6P25 valve. Greatly appreciated. Arrived today. All working as should be so a great result. Thank you Graham.
Regards
Dave Smith.

Re: The Thanks Thread
 

Thankyou to Chris (Herald1360) for the 10S/10614 leather meter case, which is in impressive condition, and now teamed up with my rebuilt 10S^46 avominor.

The nomenclature for military avo specs. at this time was quite varied, and either a Type H or a 10S^46 is a legitimate occupier of the case! (They are the same meter anyway..)

Pictured is the correct mode of insertion- it has been known for them to be shoved in 90 degrees out of synch., which makes them jam into the case. The correct method allows the leads to be rolled up and placed alongside.

Ta Chris!

Re: The Thanks Thread
 

A special thanks to Al (astral highway) for sending me a 6CW4 Nuvistor to build the 136MHz Satellite converter.

Regards
Symon.

Re: The Thanks Thread
 

Many thanks to G8KBG Tony for providing me with service information for a vintage TV which I am about to restore.

Re: The Thanks Thread
 

Thanks to Mike (Cobaltblue) for passing on some rather nice old meters to me, including what appears to be a genuine aftermarket AR88 signal meter ("genuine aftermarket" does seem like an oxymoron, though).

Also thanks to Phil G4SPZ and another Mike (Gridiron) for effecting the transfer to RWB of a BC348 chassis for me (an item that would surely have 99% of the general public muttering, "Get rid of that grubby old junk- fast!"- but is actually a very useful source of some very specific spares including output transformer/filter choke module, power/mode wafer switch and 350k/20k ganged gain pot for the cosmetically good but incomplete set here). The meters and chassis gained the British Heart Foundation a donation.

With Mike Barker's entertaining-as-always piloting of the auction, Mike Lewis's usual eclectic and useful stall and a chin-wag with Mike Izycky, a day positively flooded with Mikes!

Colin

Re: The Thanks Thread
 

You're welcome!

Always good to see end use pictures as well :)

Re: The Thanks Thread
 

Thank you to Andy ajs37 for the monitor, just perfect for my workshop. Thanks also for bringing it to RWB on Sunday.

Nigel

Re: The Thanks Thread
 

^^^


Seconded for the Tandberg music centre, ditto.

:thumbsup:

Re: The Thanks Thread
 

a Big Thankyou to Frank McVey for the very impressive HSVT cards he made for me,Les (Tower Radio)

Re: The Thanks Thread
 

My pleasure, Les - thank you.

Re: The Thanks Thread
 

Many Thanks Graham(Station X) for fast safe arrival of the valves.