Making use of a Fada case .
4 Attachment(s)
I have had this case for a few years now , and have been thinking of building a chassis into it , so this is what I ended up with , donor set was a scrap Bush TR82 ,I had a spare dial made for previous Catalin repair , all the components were fitted on to a new chassis ,the o/p stage was easy as all the transistors were attached to the transformer lending itself to an easy transplant , the dial drive took a bit of thinking about , but ended up ok , using the correct diameter drum to give the right amount of lateral travel ,the w/c switch had to be mounted at the rear, I love the two tone green , Mick.
|
Re: Making use of a Fada case .
It's a very impressive transplant overall and the green is great as you say Mick. Have you added a discrete notice somewhere to avoid confusion for future researchers? 8-\ It would have made a great magazine article!
Dave W |
Re: Making use of a Fada case .
Thanks Dave I had thought about a sticker saying for circuit see Bush TR82 , Mick.
|
Re: Making use of a Fada case .
Nice work Mick! what happened to the old chassis?
Andy |
Re: Making use of a Fada case .
Hi Andy ,It was just the case for sale no chassis . Kept looking for a chassis on the U.S.A Ebay but no luck . Mick.
|
All times are GMT +1. The time now is 9:59 pm. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.