Panasonic PBX programming
You may like to add to the Panasonic PBX thread. We found that Toshiba Laptop COM ports would work, but newer Dell's would not. I don't think we tried the INQ changes as it appeared Dell com ports did not comply with voltage and full standards compared to other laptops. Can anyone confirm what the Dell and Toshiba pin outs were as for com IRQs there are only a choice of of 4 options ? This would be in P200 processor chipsets we didn't have 486 Dell's.
|
Re: Panasonic PBX programming
WHYPERION- panasonic KXTD ETC as per from panasonic were set to certain IRQ and even Panasonic Tech support were not aware of the problems that this caused. If you are having problems using a panasonic kxtd PROGRAM and linking to a KXTD, then I'd suggest you look at trying other combinations of settings and IRQ settings.
|
All times are GMT +1. The time now is 12:28 pm. |
Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.